Author Topic: wiring /harness drawings  (Read 6347 times)

aeneasm

  • Guest
wiring /harness drawings
« on: January 15, 2006, 10:48:13 »
1970 280sl autobox,aircon,std dist,rev light. lhd 1st reg USA 1971 chassis no 113044 12 022232. need complete wiring diagram's,harness layout ,wire colours.,for engine,bodywork,autobox. present problem constant speed sol not wired,kick down not working wiring messed up.willpick tab for any expenses.

aeneas

rwmastel

  • Full Member
  • Platinum
  • ******
  • USA, OH, Canal Winchester
  • Posts: 4634
  • Pagoda SL Group: 20+ years and going strong!
Re: wiring /harness drawings
« Reply #1 on: January 15, 2006, 19:37:29 »
Perhaps you can obtain a wiring diagram by buying a manual mentioned in one of these threads, or by receiving a file directly from another member.

http://index.php?topic=3769+diagram
http://index.php?topic=3465+diagram
http://index.php?topic=1805+diagram

Here are some good publications for the W113:
http://www.sl113.org/publications.asp

Rodd
Powell, Ohio, USA
1966 230SL, Euro, Auto, Leather, both  tops
1994 E420
Rodd

Did you search the forum before asking?
2017 C43 AMG
2006 Wrangler Rubicon
1966 230SL auto "Italian"

Chad

  • Guest
Re: wiring /harness drawings
« Reply #2 on: January 15, 2006, 20:08:17 »
Is this provided in the Owner's Manual for the 280? It seems to be in the original one for 230.

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: wiring /harness drawings
« Reply #3 on: January 15, 2006, 22:58:04 »
Hello Aeneas,

USA cars as of about 1969 did not have the constant speed solenoid wired unless the car had Air Conditioning. In fact no wires were run to it at all. Prior to 1969 cars with automatic transmissions had the solenoid wired and working.

As far as the kick down, make sure that the fuses are good, make sure the three position solenoid or its linkage are not stuck, test the kickdown switch under the gas pedal also make sure its plug connection is not corroded.

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

aeneasm

  • Guest
Re: wiring /harness drawings
« Reply #4 on: January 16, 2006, 14:03:34 »
ja17    u could be correct. i have looked all over engine bay and cannot find any loose or cut wiring. car has air-con. the sol is in position.  so what keeps engine at no stall speed when stationery with air con operating.There must be a wiring diagram for the autubox. is'nt a sol that is operated by the kick down. cannot see a sol in my drawings. thanks for help.

aeneas

aeneas

aeneasm

  • Guest
Re: wiring /harness drawings
« Reply #5 on: January 16, 2006, 14:50:34 »
quote:
Originally posted by Chad

Is this provided in the Owner's Manual for the 280? It seems to be in the original one for 230.
The 250/280 sl owners manual I have does not show as it does not even have autobox. this is a new manual I just bought. I did get a drawing from MB Germany and it shows solenoid wired to autobox connections but it does not give in which harness ,numbers,colours. see jb above I think he could be correct. Its is amazing that one can't get a complete set of all elect drawing inc all mods,numbers,wire colours harnesse's.

aeneas

(Moderator's Note:  Edited to seperate quote from reply.)
« Last Edit: January 16, 2006, 21:26:42 by rwmastel »

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5719
    • http://SL113.org
Re: wiring /harness drawings
« Reply #6 on: January 17, 2006, 14:54:11 »
Aeneas - Achim Ahlert (member here) made up a color-coded diagram for the 280 SL himself that is more comprehensive than what can be found in manuals. If you email me your address, I will be glad to send you a (color) photocopy.

Cees ("Case") Klumper in Amsterdam
'69 white 280 SL automatic
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

rwmastel

  • Full Member
  • Platinum
  • ******
  • USA, OH, Canal Winchester
  • Posts: 4634
  • Pagoda SL Group: 20+ years and going strong!
Re: wiring /harness drawings
« Reply #7 on: January 17, 2006, 18:56:14 »
quote:
Originally posted by cees klumper

If you email me your address,
This can be done by clicking on the username to the left side of the message and then sending the user an e-mail.

Rodd
Powell, Ohio, USA
1966 230SL, Euro, Auto, Leather, both  tops
1994 E420
Rodd

Did you search the forum before asking?
2017 C43 AMG
2006 Wrangler Rubicon
1966 230SL auto "Italian"

jeffc280sl

  • Guest
Re: wiring /harness drawings
« Reply #8 on: January 17, 2006, 20:09:41 »
Rodd and Cees,

Is it possible for this wiring diagram to be hosted somewhere on this site?  I think it would be a valuable resource for anyone trouble shooting electrical problems.

Thanks,

Jeff C.
1970 280SL 4-speed

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5719
    • http://SL113.org
Re: wiring /harness drawings
« Reply #9 on: January 18, 2006, 16:42:24 »
I suppose this could be done, I will (assuming it's OK with Achim) see about scanning it and offering it to the webmeisters who can post larger files.

Cees ("Case") Klumper in Amsterdam
'69 white 280 SL automatic
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

jeffc280sl

  • Guest
Re: wiring /harness drawings
« Reply #10 on: January 18, 2006, 21:06:01 »
Thanks Cees.

Jeff C.
1970 280SL 4-speed