« previous next »
Pages: [1]

Author Topic: Hard top  (Read 4352 times)

n/a

  • Guest
Hard top
« on: July 24, 2003, 10:01:46 »
Help! How do I dismount the rear locks from the hard top ??

I got it of. Inside the 2 pins (7 mm)there is one 5 mm pin. I had to drill it out.
Logged

Douglas

  • Guest
Re: Hard top
« Reply #1 on: July 24, 2003, 10:23:30 »
i believe you turn them (clockwise?) until the handles are perpendicular to the sides

Douglas Kim
New York, NY
#018260
Logged

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5715
    • http://SL113.org
Re: Hard top
« Reply #2 on: July 24, 2003, 14:00:27 »
You may be referring to how to get the locks off the hardtop once the hardtop is off the body. As I recall reading in another post (have not done this myself) is you have to drive out the metal pins (carefully).
Logged
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

dwilli3038

  • Guest
Re: Hard top
« Reply #3 on: July 24, 2003, 19:55:43 »
I was able to remove the metal pins py pullong them out with locking plyers

Daryl
'64 230 SL
Logged

ted280sl

  • Full Member
  • Silver
  • ****
  • USA, NY, New Rochelle
  • Posts: 251
Re: Hard top
« Reply #4 on: July 25, 2003, 07:26:31 »
Arne,
  In order to remove the rear hardtop locks the pins need to be removed. They can be pulled out but, do it very carefully or you will brake to latch. I understand that is an expensive part. Once the pins are out the plastic cones can easily be removed exposing a nut which will release the entire latch mechanism. It is a good idea to replace the plastic cones while you have this in pieces.
Regards,
Ted
1969 280SL
In the body shop being re-painted
Logged
Pages: [1]
« previous next »