Author Topic: noise suppresser or capacitor  (Read 3957 times)

merrill

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1372
noise suppresser or capacitor
« on: October 17, 2006, 17:00:08 »
so,
I have an item connected to a terminal on my coil that I think is a
capacitor. small round metal items with only one wire.

only one wire and it is bolted next to the coil.  Cheryl at k and k said this was a noise suppressor but sls has it on their web site as a capicitor.

are these the same thing? or not?

http://www.sls-hh-catalogue.de/bin/dbframes.phtml?mid=IN02
Article: 215007 - Capacitor 'G'

I have a new red coil, points, 1.8 ohm ballast and condenser.  
should I change the noise suppressor / capacitor as well?

thanks
matt

Matt
66 230 sl - "white"
78 300 D - Blue
98 C230
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: noise suppresser or capacitor
« Reply #1 on: October 17, 2006, 21:08:43 »
Hello Matt,

Yes these cars which came from the factory with radios has a filter/capacitor on the coil.

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

hands_aus

  • Full Member
  • Platinum
  • ******
  • Australia, Queensland, Brisbane
  • Posts: 1543
Re: noise suppresser or capacitor
« Reply #2 on: October 18, 2006, 05:58:41 »
The names 'filter capacitor condenser noise suppressor' are all for the same thing.

The condenser that is fitted to the distributor does the same job as the 'added' noise suppressor on the coil.

Incidentally, there is usually a 'noise suppressor' on the alternator and often one on the electric fuel pump.

MB mentions all these in the BBB job 82-20, second series book 1968-1972

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL #114, auto, ps , 717,717
best of the best

al_lieffring

  • Guest
Re: noise suppresser or capacitor
« Reply #3 on: October 18, 2006, 16:38:15 »
Capacitor, The device
Noise Suppresser, The Application.

Be sure to attach the noise supressor to the + side of the coil.

Al

113-042-10-014715
built 11 Jan 66
904/396 blue, Ivory Tex
condition- rust bucket