Pagoda SL Group
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
News:
Please check out joining the
Emergency Contact List
for help during your travels!
Home
Help
Technical Manual
Search
Login
Register
Pagoda SL Group
»
W113 Pagoda SL Group
»
General Discussion
»
progress on engin bay 66 230 sl
« previous
next »
Print
Pages: [
1
]
Author
Topic: progress on engin bay 66 230 sl (Read 3990 times)
merrill
Full Member
Platinum
USA, TX, Austin
Posts: 1372
progress on engin bay 66 230 sl
«
on:
January 31, 2007, 18:59:03 »
so, I thought I would provide an update on the progress refreshing the engine bay on my 66 230 sl.
attached are some photos of the progress on the sl engine bay.. the motor, tranny are in ca for rebuild.
I had stripped the engine bay to bare metal, treated the metal, fixed the rust and holes.
appliied 2 coats of primer and 2 coats of mb white which matches the paint exactly. the paint was from napa, single stage, their web site allowed me to get the excact color codes for the mb white.
replaced all the rubber grommets in the engine bay and on the wiring harness.
I also have attached some photos of the inj pumo that hans at H&R rebuilt
still need to finish installing the brake lines and brake booster / master cylinder and accelerator linkage. lots more parts coming.
matt
Download Attachment:
ballast 2.jpg
46.64 KB
Download Attachment:
ballast mount.jpg
54 KB
Download Attachment:
body ground 2.jpg
41.13 KB
Download Attachment:
body ground 2.jpg
41.13 KB
Download Attachment:
coil mount.jpg
53.03 KB
Download Attachment:
drivers fender and relay.jpg
43.36 KB
Download Attachment:
drivers fender below batt box.jpg
27.35 KB
Download Attachment:
engine bay.jpg
41.42 KB
Download Attachment:
firewall center.jpg
31.54 KB
Download Attachment:
firewall fuse box.jpg
30.04 KB
Download Attachment:
firewall looking toward passenger side.jpg
30.21 KB
Download Attachment:
fuel inj pump drivers side.jpg
49.27 KB
Download Attachment:
fuel lines 2.jpg
48.37 KB
Download Attachment:
fuel lines to pump.jpg
62.37 KB
Download Attachment:
ground to chassis.jpg
49.95 KB
Download Attachment:
inj pump air aux components.jpg
44.32 KB
Download Attachment:
inj pump passenger side.jpg
43 KB
Download Attachment:
passenger fender near wiper motor.jpg
28.22 KB
Download Attachment:
passenger side air filter area.jpg
33.37 KB
Download Attachment:
windshield and washer.jpg
52.24 KB
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230
Logged
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230
merrill
Full Member
Platinum
USA, TX, Austin
Posts: 1372
Re: progress on engin bay 66 230 sl
«
Reply #1 on:
January 31, 2007, 19:28:20 »
oops, I mixed some new and old photos together. sorry
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230
Logged
Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230
aomastu
Guest
Re: progress on engin bay 66 230 sl
«
Reply #2 on:
January 31, 2007, 22:07:08 »
So that's what's under all the gunk
'69 280sl
P.O. Box 150128
Austin, TX 78715
Logged
Print
Pages: [
1
]
« previous
next »
Pagoda SL Group
»
W113 Pagoda SL Group
»
General Discussion
»
progress on engin bay 66 230 sl