Author Topic: 280 SL Toolkits - Don't be confused  (Read 31644 times)

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #25 on: October 10, 2004, 23:37:26 »
My guess is that the 220D SL must of had a diesel engine transplant.

1969 280sl 5 spd        1999 ML320          Gainesville,Fl.

rwmastel

  • Full Member
  • Platinum
  • ******
  • USA, OH, Canal Winchester
  • Posts: 4634
  • Pagoda SL Group: 20+ years and going strong!
Re: 280 SL Toolkits - Don't be confused
« Reply #26 on: October 15, 2004, 11:07:53 »
quote:
Originally posted by hauser

My guess is that the 220D SL must of had a diesel engine transplant.

1969 280sl 5 spd        1999 ML320          Gainesville,Fl.


Correct - Watler put a 220D engine in a W113 SL body.  I don't know what to call it:

230SL 2.2D
220SL Diesel
220SLD
220DSL

Rodd
Powell, Ohio, USA
1966 230SL, Euro, Auto, Leather, both  tops
1994 E420
Rodd

Did you search the forum before asking?
2017 C43 AMG
2006 Wrangler Rubicon
1966 230SL auto "Italian"

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4076
Re: 280 SL Toolkits - Don't be confused
« Reply #27 on: December 14, 2007, 11:34:15 »
Have a look at the Technical Manual Toolkit topic. If you have any further or new information, please update the technical manual directly.

Peter

1970 280SL. Also known as 'admin@sl113.org' and organiser of the Technical Manual.
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #28 on: December 14, 2007, 20:31:11 »
A few months ago there was a toolkit for a 600 Grand on eBay.  This particular kit was in new condition with some of the tools wrapped in wax paper.  Although not correct for a W113 I feel it wouldn't look all that out of place.  Extra tools along with a hammer to boot!  You can never havee enough of the right tools.

1969 280sl 5 spd
Gainesville, Fl.

Bob G ✝︎

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #29 on: December 15, 2007, 04:18:22 »
Sedan and early 230SL tool kits mounted with slots in the bag to the back section of the trunk below the trunk lid opening. There was also a holder fot the tire alignment tool place in a simular fashion. Later 1966 and on W113 had tool wrap kits in the spare tire wrap. when opening the tire rap there is a pocket for the lug wrench and below a pocket for the tire alignment tool.
It is  sad that most of these kits got lost or misplaced I had to hunt down a correct tool kit with the famous fuse pliers and fuse box with MBZ logo. the wraps as tey ere called were mad out of spare MBZ tex or soft top canvas. An real tool rap will have a green materical inside and the Mercedes-Benz star in bosed in black on the inside. They are far and few left to fine.Two difference jacks were availible an early Bilstein two peice jack and later one peice jack found on 108 and 109 sedans.A tire crock was bolted below the spare as well to place in front or back of the front tires to protect from rolling back.
An optional emergency tool kit pouch was availible from local dealers which included several small wrenches and a tool to lube door hinges as well as a factory tire gauge in a blue box with the star logo. this was seeen in the optional equipment blue cataloge.
Some of these tools can be purchased from German speciality tool houses and sellers you just have to know whatto ask for. the orgianal tools had the Mercedes-Benz stamp andor star imbosed in the wrench, but many of these tools are the same and maufactured by companies like stalwille.
I hope this is formation is help fulland I will try and post pictures with a new ditical camera as soon as I figure how to reduce the size.
Bob Geco
« Last Edit: December 15, 2007, 20:25:32 by Bob G »

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #30 on: December 15, 2007, 22:32:27 »
The one tool that always seems to be missing from the bag are the water pump pliers.  I have two complete kits sans pump pliers.  I understand that Stamstag sells these.  

Has anyone purchased this tool from Stamstag and if so how close is it to the original?

1969 280sl 5 spd
Gainesville, Fl.
« Last Edit: December 15, 2007, 22:32:52 by hauser »

hands_aus

  • Full Member
  • Platinum
  • ******
  • Australia, Queensland, Brisbane
  • Posts: 1543
Re: 280 SL Toolkits - Don't be confused
« Reply #31 on: December 16, 2007, 05:57:14 »
quote:
Originally posted by hauser

The one tool that always seems to be missing from the bag are the water pump pliers.  I have two complete kits sans pump pliers.  I understand that Stamstag sells these.  

Has anyone purchased this tool from Stamstag and if so how close is it to the original?

1969 280sl 5 spd
Gainesville, Fl.


Any pic available?

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL #114, auto, ps , 717,717
best of the best


Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
Re: 280 SL Toolkits - Don't be confused
« Reply #33 on: December 16, 2007, 09:44:49 »
quote:
Originally posted by hands_aus

quote:
Originally posted by hauser

The one tool that always seems to be missing from the bag are the water pump pliers.  I have two complete kits sans pump pliers.  I understand that Stamstag sells these.  

Has anyone purchased this tool from Stamstag and if so how close is it to the original?

1969 280sl 5 spd
Gainesville, Fl.




Any pic available?

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto



Download Attachment: T0051.jpg
62.82 KB

Top one.
Tool kit made of soft top material.

naj



68 280SL
68 280SL

hands_aus

  • Full Member
  • Platinum
  • ******
  • Australia, Queensland, Brisbane
  • Posts: 1543
Re: 280 SL Toolkits - Don't be confused
« Reply #34 on: December 17, 2007, 04:57:45 »
Thanks Naj

I was wondering what water pump pliers are.

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL #114, auto, ps , 717,717
best of the best

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4198
Re: 280 SL Toolkits - Don't be confused
« Reply #35 on: December 21, 2007, 12:08:23 »
Hauser,

I did purchase one of the water pump pliers from Samstag, and aside from being a bit shiny, it was a good replacement. I am traveling for the Holiday, and can't give you a direct picture or comparison, but I would say they are a very good alternative.

Jonny B
1967 250SL Auto
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

Douglas

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #36 on: December 21, 2007, 19:49:38 »
Hi Jonny,

Was it made by HAZET or HEYCO?

Douglas Kim
New York
USA

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #37 on: December 21, 2007, 20:44:45 »
Johnny B was nice enough to bring in all sorts of materials at the Blacklick event.  There was tons of literature along with two toolkits.  I looked at the pliers but do not remember the manufacturer. :(

1969 280sl 5 spd
Gainesville, Fl.

Bob G ✝︎

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #38 on: December 22, 2007, 20:31:19 »
600 tool kit. what is the  hammer for?

Bob Geco

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #39 on: December 22, 2007, 22:26:28 »
The hammer is probably the last resort in getting things to work properly. :D   Wasn't the 600 dubbed something like "the mechanics playground"?

1969 280sl 5 spd
Gainesville, Fl.
« Last Edit: December 22, 2007, 22:26:55 by hauser »

Bob G ✝︎

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #40 on: December 28, 2007, 03:29:24 »
The water pump lliers is made by Heyco and stamped N300 Chrome silver natural color. The only difference is when Mercedes-Benz put it in the tool roll it had a small star on it. same company.
I cannot seem to fine these from the Heyco file I have but prehaps Andrew at Samsag sales may have some left over in inventory. they sold for aqbout $34.00 USD

Bob Geco

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 7059
Re: 280 SL Toolkits - Don't be confused
« Reply #41 on: December 28, 2007, 08:56:23 »
quote:
Originally posted by hauser

The hammer is probably the last resort in getting things to work properly. :D   Wasn't the 600 dubbed something like "the mechanics playground"?

1969 280sl 5 spd
Gainesville, Fl.



One of the International Stars members, Murdoch "Doc" Campbell was a former MBCA National President.  He once had a 600 and said if you have one you really need your own mechanic--full time.

Michael Salemi
1969 280SL
Signal Red 568G w/Black Leather (Restored)
President, International Stars Section
Mercedes-Benz Club of America
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2023 Ford Escape Hybrid
2024 Ford Mustang Mach Ex PEV

Douglas

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #42 on: December 28, 2007, 09:51:14 »
quote:
Originally posted by Bob G

The water pump lliers is made by Heyco and stamped N300 Chrome silver natural color. The only difference is when Mercedes-Benz put it in the tool roll it had a small star on it. same company.
I cannot seem to fine these from the Heyco file I have but prehaps Andrew at Samsag sales may have some left over in inventory. they sold for aqbout $34.00 USD

Bob Geco



Bob,

I believe Hazet also made that tool. Generally speaking, you're going to find Hazet tools in a W113.

Douglas Kim
New York
USA

Bob G ✝︎

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #43 on: December 28, 2007, 18:20:42 »
I talked to Andrew at www.samstagsales.com . The water pump pliers is still availible and can be found by going to the BMW tools under trunk tool kits part # 71 11 1 103091 heyco type 300 9/1/2 inches long cost is $27.95 plus shipping.
Do not worry it will not say BMW on the tool.

If you want the star on the pliers I founnd the same water pump pliers in the Mercedes-Benz tools section part # 0005810238 $35.00 each same pliers except with Mercedes-Benz star inbosed into pliers.

Bob Geco
« Last Edit: December 28, 2007, 18:36:45 by Bob G »

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #44 on: December 28, 2007, 18:31:11 »
Bob, did you happen to ask Andrew if he could get a Hazet brand water pump set?  I believe they also sell Hazet tools.

1969 280sl 5 spd
Gainesville, Fl.

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4198
Re: 280 SL Toolkits - Don't be confused
« Reply #45 on: December 30, 2007, 17:39:32 »
The pliers I have are labeled Heyco.

Jonny B
1967 250SL Auto
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

Bob G ✝︎

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #46 on: December 31, 2007, 18:15:35 »
Received my water pump pliers from Andrew at samsag sales. This is the one with star imbossed on it made by Heyco.Their really is no difference between the Heyco 300 you buy direct from Heyco. with the exception of packaging. The One Mercedes-Benz puts the star logo on cost about $8.00 more just for a tiny star no one will ever see.
The pliers referred to as combination pliers  came in the orginal Mercedes-Benz bag with the Mercedes-Benz blue lable and part# A 000 581 02 38 Whoppie!!! show that to the judges and I do not think you get much of a responce.
 Heyco makes quality tools so if you are missing yours , just order the Heyco brand from Samsage sales with out the star and use the $7.00 to buy you self a capachino down at the local Star bucks next time  you take you Pagoda out for a Sunday spin.
Bob Geco

Douglas

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #47 on: December 31, 2007, 19:56:37 »
I wonder if the equivalent pliers from Hazet are even available today. They stopped including it in the MB toolkits quite awhile back.

Douglas Kim
New York
USA

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #48 on: December 31, 2007, 20:34:32 »
What supplier does MB use today in their toolkits?

1969 280sl 5 spd
Gainesville, Fl.

hauser

  • Guest
Re: 280 SL Toolkits - Don't be confused
« Reply #49 on: December 31, 2007, 21:26:25 »