Author Topic: spring inside bottom of gas tank?  (Read 4363 times)

seamus

  • Guest
spring inside bottom of gas tank?
« on: February 15, 2008, 16:27:51 »
Hello, I am a newbie in need of some help. Today I popped of the fuel sending unit just to get a look inside the gas tank of my 280sl. Other than just a little debris on bottom, I noticed a spring about 3 or 4 inches long and 1 inch diameter laying on its side in the bottom of the tank. Could anyone tell me where the heck this spring should be, or where it came from? thanks, Seamus

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: spring inside bottom of gas tank?
« Reply #1 on: February 15, 2008, 18:49:30 »
Hello Seamus,

They used to sell anti-syphon devices which could be inserted in the filler necks of gas tanks.  They were coil springs which kept syphon hoses from being used.  Sounds like this could be what you found!

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

seamus

  • Guest
Re: spring inside bottom of gas tank?
« Reply #2 on: February 15, 2008, 20:27:36 »
Joe,
That is exactly what it looks like, I guess tomorrow I'll be goin' spring fishin'(with magnet), appreciate your help, Seamus

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: spring inside bottom of gas tank?
« Reply #3 on: February 16, 2008, 01:09:18 »
Also fished more than one spring from the gasoline nozzle out of tanks in the days before the restricted filler neck(1974?)

My favorite was the plastic ball from the end of the fuel gauge sending unit on a Saab that got loose and wedged itself in the filler pipe. Every time the owner tried to fill the tank gas would squirt back at him. He was not amused.

glennard

  • Guest
Re: spring inside bottom of gas tank?
« Reply #4 on: February 16, 2008, 11:29:01 »
Leave it in there-sacrifical metal-like zinc on a boat hull???