« previous next »
Pages: [1]

Author Topic: SL 280 Cylinder head '67-'73  (Read 4822 times)

Saltydog

  • Guest
SL 280 Cylinder head '67-'73
« on: July 18, 2008, 09:04:31 »
My poor baby has been out of action now for 9 months and its breaking my heart. My mechanic cannot get his hands on a cylinder head for the SL 280 engine. He says the part number is 130 018 3201. Does anyone know who remanufactures this part. Is there a difference in the Parts made in the US and in Europe (metric versus Imperial?)

Important info: This car was bought fron Canada and made in the US (I think)
« Last Edit: July 18, 2008, 13:50:03 by 280SL71 »
Logged

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: SL 280 Cylinder head '67-'73
« Reply #1 on: July 18, 2008, 14:04:16 »
quote:
Originally posted by Saltydog../..My mechanic cannot get his hands on a cylinder head for the SL 280 engine. He says the part number is 130 018 3201. Does anyone know who remanufactures this part?

An M-B friend of mine bought a brand new M130 engine head for his restoration project just a few weeks ago.
The vendor in this case was SLS in Hamburg. http://213.239.220.84/start/kontakt.phtml?lan=2
If you are in the US or elsewhere, try vendors closer to you according to list on this website http://sl113.org/links.asp

.
« Last Edit: July 18, 2008, 14:07:59 by mbzse »
Logged
/Hans S

forrestjordan

  • Guest
Re: SL 280 Cylinder head '67-'73
« Reply #2 on: July 19, 2008, 17:47:22 »
 :evil: Please disreguard what I wrote below, I just read further and found Benz Dr.'s message on 19 Jan. '05 in which he indicated that the engine in my 1970 280SL is original as a 280SE/A and not a rebuilt configuration of some kind.  It has had me puzzeled for quite some time as to how it was put togeather. :mrgreen:


I have found an interesting situation in which I may have a solution for you, if you are not concerned about original equipment being installed.  Looking at the attached photo, you can see that the cylinder head is a 280SE/A and it is installed over the crankshaft housing, which is stamped with the original engine numbers as printed on the original Data Card.  The car is a 1970 280SL.  It seems a perfect fit and runs quite well.  Have had no problems with it.



Download Attachment: cylinder head and rocker cover #2.jpg
153.99 KB
« Last Edit: July 19, 2008, 20:06:38 by forrestjordan »
Logged

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: SL 280 Cylinder head '67-'73
« Reply #3 on: July 25, 2008, 21:57:45 »
I have a  280SE/A head from a euro 280SL if someone needs this sort of part. I have the cam that goes with it.
Logged
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: SL 280 Cylinder head '67-'73
« Reply #4 on: July 30, 2008, 08:38:28 »
US and European Cylinder heads should be the same. However what would be helpfull is the casting number(this will be different from the part number) which should be on the side of the cylinder head as well as "280" or "280 SE/A".

The year of your car might help as well.

Here is a list of cylinder heads casting numbers from JA17's Cylinder head discussion.

http://www.sl113.org/forums/uploaded/ja17/200441225611_cylinder%20head%20and%20gasket%20chart.jpg

Best of luck,
Pat

Logged

Q45Denver

  • Guest
Re: SL 280 Cylinder head '67-'73
« Reply #5 on: July 30, 2008, 13:15:04 »
quote:
Originally posted by Benz Dr.

I have a  280SE/A head from a euro 280SL if someone needs this sort of part. I have the cam that goes with it.


What is the condition and price? I have early model M130. Will latter model head fit?
Logged
Pages: [1]
« previous next »