« previous next »
Pages: [1]

Author Topic: Torque Specification  (Read 3431 times)

Tonys113

  • Guest
Torque Specification
« on: May 18, 2009, 17:52:51 »
Can someone please give me the Torque Specification for the Fuel Injectors?
I received my new units today.

Thanks

Tony
Logged

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4198
Re: Torque Specification
« Reply #1 on: May 18, 2009, 23:18:07 »
Per the 1966 Technical Data book, the tightening torque for the injectors is 3-3.5 Mkp (times 7.233 to get to foot pounds.)
I also checked the later books 1969 and 1971 - these show a torque of 3-3.5 mkp.
« Last Edit: May 18, 2009, 23:49:07 by Jonny B »
Logged
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: Torque Specification
« Reply #2 on: May 18, 2009, 23:56:12 »
I can verify Jonny B's data: my technical data book from 1969 says injection nozzles in cylinder head is 3-3.5 mkp.

Also, as mentioned elsewhere on the site, the box nut of injection lines is 2.5 mkp (2.5 x 7.233 ~=18 ft-lbs).
Logged
Waqas (Wa-kaas) in Austin, Texas

Tonys113

  • Guest
Re: Torque Specification
« Reply #3 on: May 19, 2009, 13:16:47 »
Thanks, I appreciate it very much.

Tony
Logged
Pages: [1]
« previous next »