Author Topic: Mystery clip, heater area  (Read 3678 times)

cascadia

  • Inactive
  • Senior
  • ***
  • USA, OR, Portland
  • Posts: 246
    • http://www.cascadiaclassic.com
Mystery clip, heater area
« on: February 19, 2010, 00:36:25 »
I'm putting the heater core and flaps back in the car and can't remember what purpose this piece serves!  Once I'm done in this area I definitely don't want to have to go back.  There are 2 of them so I'm wondering if they work somehow with the left and right flaps?  The piece is 2" long and 1/2" wide.
Bob in Portland, Oregon.

bpossel

  • Guest
Re: Mystery clip, heater area
« Reply #1 on: February 19, 2010, 00:39:15 »
Wow???  I have a 280sl.  I took my car completely apart and put it back together again and I am sorry to say that I dont recognize this part.
Bob

cascadia

  • Inactive
  • Senior
  • ***
  • USA, OR, Portland
  • Posts: 246
    • http://www.cascadiaclassic.com
Re: Mystery clip, heater area
« Reply #2 on: February 19, 2010, 00:45:09 »
I figured you'd be the one who would know!  Uh-oh  :P
Bob in Portland, Oregon.

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4735
Re: Mystery clip, heater area
« Reply #3 on: February 19, 2010, 01:29:19 »
Looked through all my photos of the heater core, blower, and flaps but cannot find it associated with these parts.
Does your heater core have hub caps?  ;D
Because it looks like a wheel cover clip.
See: http://www.sl113.org/wiki/uploads/WheelsTires/two_piece_outerring.jpg
« Last Edit: February 19, 2010, 01:38:07 by 66andBlue »
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

cascadia

  • Inactive
  • Senior
  • ***
  • USA, OR, Portland
  • Posts: 246
    • http://www.cascadiaclassic.com
Re: Mystery clip, heater area
« Reply #4 on: February 19, 2010, 03:05:03 »
Wow, who'd have thunk it  :)  Thanks for the answer, now I can move on to the heater levers and blower assembly.  Got the new heater core in, I lubed up the control valve with plumber's grease, should be good for another 40 years.
Bob in Portland, Oregon.

jacovdw

  • Guest
Re: Mystery clip, heater area
« Reply #5 on: February 19, 2010, 09:04:05 »
I agree with Alfred. Looks a lot like a wheelcover clip

Having been through my heatercore R&R mission a couple of years ago, I don't recall seeing any clips like that.