« previous next »
Pages: [1]

Author Topic: Removing Emergency Brake Cables - What's the Secret Sauce?  (Read 2879 times)

ctaylor738

  • Full Member
  • Platinum
  • ******
  • USA, VA, Falls Church
  • Posts: 1161
Removing Emergency Brake Cables - What's the Secret Sauce?
« on: August 26, 2010, 22:04:04 »
I have one step left in the dismantling of my 3.27 rear end - removing the parking brake cables.  I have removed the clips on the brake side, but the cables won't budge.  I have tried vise grips, but nothing wants to move.  

From the EPC, it looks like the cable comes off in one piece.

What am I missing?

Thanks.
« Last Edit: August 26, 2010, 22:06:22 by ctaylor738 »
Logged
Chuck Taylor
1963 230SL #00133
1970 280SL #13027 (restored and sold)
1966 230SL #15274 (sold)
1970 280SL #14076 (sold)
Falls Church VA

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7384
Re: Removing Emergency Brake Cables - What's the Secret Sauce?
« Reply #1 on: August 27, 2010, 04:57:14 »
Hello Chuck,

With the clips removed, the cables and housings should pull straight out. They can get badly stuck.  Apply heat to  the casting around the cable and try again.
« Last Edit: August 27, 2010, 04:59:34 by ja17 »
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

ctaylor738

  • Full Member
  • Platinum
  • ******
  • USA, VA, Falls Church
  • Posts: 1161
Re: Removing Emergency Brake Cables - What's the Secret Sauce?
« Reply #2 on: August 30, 2010, 15:26:06 »
Heat and vise grips got the left side out.  On the right side, it took heat, a hammer, and a 12 mm deepwell socket as a mandrel to knock it out.
Logged
Chuck Taylor
1963 230SL #00133
1970 280SL #13027 (restored and sold)
1966 230SL #15274 (sold)
1970 280SL #14076 (sold)
Falls Church VA
Pages: [1]
« previous next »