Author Topic: Soft top stuck... help needed  (Read 3470 times)

ludo21

  • Guest
Soft top stuck... help needed
« on: September 24, 2012, 19:00:53 »
I have managed to get my soft top stuck with the rear bow stuck in the box compartment!

The fix for this is described in the Tech Manual but I can't get it to work.... the inverted 'L' brackets mention (that I am supposed to push up) have no give in them at all! (they merely form part of the rear bow frame).

I will try and attach photo to show the part I mean, but it does not appear to be spring loaded and does not move!

Any ideas ???

Having trouble attaching photoso will try and post it later.

ludo21

  • Guest
Re: Soft top stuck... help needed
« Reply #1 on: September 24, 2012, 19:01:32 »
Photo...

JamesL

  • Full Member
  • Platinum
  • ******
  • United Kingdom, London, London
  • Posts: 3611
Re: Soft top stuck... help needed
« Reply #2 on: September 24, 2012, 19:05:17 »
This happened to me recetntly. I found that if I stood on the floor in the back of the car and had the front of the top halfway up, I could just about reach over to the rear bow and lift it out quite easily. Doing it from one side didn't work as the whole thing twisted a bit so standing in the back it was...
James L
Oct69 RHD 280 in DB906 with cognac leather

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5720
    • http://SL113.org
Re: Soft top stuck... help needed
« Reply #3 on: September 24, 2012, 23:25:39 »
If you do a search on the forum you will find many a post that goes into this. Given how many owners have been stymied by this problem, I'd call this a design flaw ...
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4075
Re: Soft top stuck... help needed
« Reply #4 on: September 25, 2012, 09:02:23 »
You need to push the L shaped lever (but it will only move a little) and whilst you do this, push HARD on each side of the frame up-right. You indeed cannot move the lever on it's own.

Try again... http://www.sl113.org/wiki/Tops/SoftTop#StuckSofttop
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!