Author Topic: 230SL Overhaul in NL  (Read 5852 times)

Brian in NL

  • Full Member
  • Senior
  • ***
  • USA, CA, Santa Clara
  • Posts: 159
  • American living in the Netherlands & USA
230SL Overhaul in NL
« on: March 27, 2013, 21:56:48 »
After finally getting my 1967 230SL out of storage in Michigan and shipping it to the Netherlands, I decided to get a long overdue overhaul of the engine and mechanicals. The engine was in pretty poor shape from sitting idle for so many years, even though it has just over 100K miles on it. Nico at Van Dijk is doing the work and I've been impressed with his knowledge of the cars and his desire to do the work the way it should be done.  The car just got back from the paint shop, where the engine bay was resprayed to match the excellent exterior paint job that Motorwerks did back in Michigan. Can't wait to see the sparkling clean, like-new engine back under the hood!

Here are a few pics, but for a full pictoral documentation of the work, check out my Flickr album here:

http://www.flickr.com/photos/brianakre/sets/72157632654839237/with/8596132928/

Brian
Brian Akre
1967 230 SL, U.S. spec, 050 White, Black top, 116 Kaviar interior, #17,030 of 48,912;
1997 SL 500 Sport, U.S. spec, 269 Tourmaline Green, Parchment interior, #145,506 of 204,940;
1991 Nissan Figaro, Emerald Green, #15,717 of 20,073;
2014 VW GTI, White, daily driver

Garry

  • Full Member
  • Platinum
  • ******
  • Australia, Victoria, Kyneton and Brisbane Queensland
  • Posts: 5235
  • Audit Committee
Re: 230SL Overhaul in NL
« Reply #1 on: March 28, 2013, 00:57:28 »
I have just recently (4 weeks ago) finished doing a complete top to bottom engine overhaul and the engine bay clean up.  As everything was out I did swaps on the steering pump, alternator brake booster, installed electronic ignition, a seal kit for the FIP, complete seal kit for the front end, king and tie rod replacement and replaced all hoses, screws, bolts, nuts and clamps, re-plating of all cad plated items items. Cost of parts only, mostly out of USA, $7k including new head, valve stems, seals, seats balls etc etc etc, pistons specially made, rings, bearings.

But it does look nice now.

Now all I have to do is keep it clean, and that is no mean feat.
Garry Marks
Melbourne/ Kyneton, Brisbane. Australia
1969 MB 280SL 5 speed RHD SOLD.
1965 MB 230SL Auto RHD Lt Blue 334G, Top 350H, Tourist Delivery.
1972 MB 280CE Auto RHD 906G
2005 MB A200
2006 MB B200
2019 Izuzu DMax 4x4 Slide-on camper.
2022 Volvo XC40 Electric
2024 Volvo EX30 Electric

49er

  • Full Member
  • Platinum
  • ******
  • USA, CA, El Dorado Hills
  • Posts: 1426
Re: 230SL Overhaul in NL
« Reply #2 on: March 28, 2013, 01:16:28 »
Hello Brian, Beautiful looking 230 SL! Your pictures of the engine bay say "like-new". Believe me, they didn't look that good when "new" :-) be sure to post some pictures once you get the engine put back in.

John
1969 280SL 003820
Un Restored, All Original, including the paint
Original Owner, Purchased September 18, 1968
4 speed manual, PS. 77217 miles
7280 miles since awoken from her 20+ yr "nap" in 2010

Stuttgart68

  • Guest
Re: 230SL Overhaul in NL
« Reply #3 on: March 28, 2013, 03:14:19 »
After finally getting my 1967 230SL out of storage in Michigan and shipping it to the Netherlands, I decided to get a long overdue overhaul of the engine and mechanicals. The engine was in pretty poor shape from sitting idle for so many years, even though it has just over 100K miles on it. Nico at Van Dijk is doing the work and I've been impressed with his knowledge of the cars and his desire to do the work the way it should be done.  The car just got back from the paint shop, where the engine bay was resprayed to match the excellent exterior paint job that Motorwerks did back in Michigan. Can't wait to see the sparkling clean, like-new engine back under the hood!

Here are a few pics, but for a full pictoral documentation of the work, check out my Flickr album here:

http://www.flickr.com/photos/brianakre/sets/72157632654839237/with/8596132928/

Brian
Hey Brian,
My Pagoda and I will return back to Europe next year, how was the shipping experience? With whom did you do the transfer from the U.S. to the Netherlands? Since I own the Pagoda more than 6 months I won't pay any import duty to Europe, do you know about other involved costs?
hanks
Enzo
« Last Edit: March 31, 2013, 09:42:08 by Peter van Es »

Brian in NL

  • Full Member
  • Senior
  • ***
  • USA, CA, Santa Clara
  • Posts: 159
  • American living in the Netherlands & USA
Re: 230SL Overhaul in NL
« Reply #4 on: March 28, 2013, 06:07:39 »


Enzo,

I had a long conversation (via message, not posts) with a few of the veteran club members over here before I shipped my car.  Here is my final report to them on how I handled it, including the costs. Makes sense to post it for you and others to see.  The import taxes/VAT vary depending on what country you are importing it to, so it pays to check in advance so there are no surprises. I know in Holland, if you import a car you have owned for more than 6 months as part of your personal move to the country, there is no taxation. But the paperwork is horrendous!

Let me know if you have any questions or need any info on the companies mentioned below...


Peter, Cees:

First, my belated thanks for your assistance last summer when I was arranging to have my 230SL shipped to The Netherlands. 

I eventually ended up having it trucked by Reliable Carriers Inc. from Detroit to the port of New York, and from there it was shipped to Rotterdam through CFR Rinkens, a broker based near Los Angeles. I was familiar with Reliable, as I used to work in Detroit for General Motors, and Reliable does much of the car hauling for the Big Three automakers there.  CFR has a nice container setup for shipping cars overseas, and they were cost-competitive.

The car arrived without a scratch, I'm happy to report, and started right up. The only problem was back on the East Coast of the U.S. When the car arrived at the port storage area in New Jersey, the VIN was logged into their computer without the last few numbers. So when they went to search for it under the number I gave them, they could not find it!  I had images of it being stolen by a New Jersey gang of car thieves and resold on the black market!  Fortunately, after a couple of nervous days, the shipping receiver and the trucker figured out the problem and the car was safe in the port warehouse.

In the end, it cost me nearly 2900 EUR for everything: USD 800 for the trucking to New York, USD 1095 for shipping to Rotterdam, USD 600 for insurance coverage in transit to Rotterdam, then EUR 952 for handling, customs fees and 6% import VAT in Rotterdam.

The Dutch VAT was less than I expected, only EUR 322, as it was based on the price I paid for the car in 1981.  I had considered trying to get an import exemption to include the car as part of my moving possessions, but I was past the one-year grace period and it wasn't worth the hassle of applying.

My car is now in the good hands of Van Dijk in Lisserbroek. I've decided to have them do a complete engine overhaul, which is long overdue, and to fix a few other minor things. I've been very impressed with their knowledge of these cars and the quality of their work. I'm expecting it to be done in the next couple in months in time for some spring driving.

Hope you meet you both at the anniversary event in August.

Best regards,
Brian
Brian Akre
1967 230 SL, U.S. spec, 050 White, Black top, 116 Kaviar interior, #17,030 of 48,912;
1997 SL 500 Sport, U.S. spec, 269 Tourmaline Green, Parchment interior, #145,506 of 204,940;
1991 Nissan Figaro, Emerald Green, #15,717 of 20,073;
2014 VW GTI, White, daily driver