it seems that I can add one on my own: last Saturday I finally got the key for my Pagoda that was declared as nearly fully finished, fine-tuned etc. I say nearly finish as all the mechanic and body related items have been completed, and there are only a few things that require some more care. Anyway, the car drove well, the sound of the engine was music to my ear and everything seemed fine.
I had an invitation to participate in a vintage Mercedes gathering some 50 km (35 miles) away, so last Saturday I headed in that direction enjoying cloudless sky and green scenery of Warsaw suburbs.
As a part of the route happened to be a Freeway, I pushed the car a bit driving at about 135km/h (85m/h) and then, suddenly, the engine went to idle revs and there was no reaction from pressing the acceleration pedal.
Having stopped on the security sleeve, I tried to see what went wrong and soon was able to locate the culprit: one of the accelerator rods was moving free as its ball socket broke away from the ball. Unfortunately, it was the one that is deeply down under the collector on the right side of the engine.
I called the mechanic who worked on the car and he was only able to advise me to try fixing it by hand. He obviously warned me that it may not work as some force is necessary and the space is very limited, and that I should be careful not to touch the hot parts. With nearly 30oC (95oF) outside and after driving one hour you can imagine that waiting for the engine to cool down could last for ages. After some 45 min, using as protection the tool bag (original
), I started my unequal battle with the rod. Finally, after several attempts, I pushed it sufficiently well, so it moved again in place. I was first quite sure that it would break free again soon, but to my surprise, things held firmly, so I was able to join my colleagues in the last hour of the gathering and, later on, drive safely home.
Bottom line: I pleased to have fixed this stuff by myself, sadly at the expense of one nasty burn on my hand. I was also surprised that the replacement piece costs only 2.68 Euro at SLS, as I hoped that I repaired something more valuable that would be very costly to replace
. Anyhow, it was amazing how a little, if not insignificant piece of metal can affect your life...
And what was so unusual in this story? Well… it happened on... the first day I actually drove my complete and restored Pagoda for the first in Poland after bringing it here fro the US in 2009 and a lengthy renovation ...