Author Topic: Parts from newer cars for our pagodas?  (Read 9293 times)

Bonnyboy

  • Full Member
  • Gold
  • *****
  • Canada, BC, North Vancouver
  • Posts: 912
  • 1969 280sl Euro 4sp LSD
Parts from newer cars for our pagodas?
« on: March 12, 2014, 16:26:14 »
I keep running across older sedans - 300's and 280's that have for the most part been abandoned.  Typically the stereos are gone and the interiors are mouldy but mechanically they are all there.  Is there any thing worth salvaging on these old beasts if I get the chance that we can use on our Pagodas?  I was thinking that I could take off the good bits and send the rest to the crusher. 
 
Ian
69 280SL
65 F-100
73 CB750K
75 MGB
78 FLH
82 CB750SC
83 VF 1100C
94 FLHTCU
08 NPS50
12 Pro 4X

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: Parts from newer cars for our pagodas?
« Reply #1 on: March 13, 2014, 14:25:10 »
I keep running across older sedans - 300's and 280's that have for the most part been abandoned.  Typically the stereos are gone and the interiors are mouldy but mechanically they are all there.  Is there any thing worth salvaging on these old beasts if I get the chance that we can use on our Pagodas? 
You have two car photos attached.  The first is a W109 300 SE, the second is a W116 unknown.
W108 / W109 cars have lots of common parts, switches sometimes, if w108 and fuel injection then fuel pump and lots of engine/injection stuff.  If you have access to the 300 SE get the tachometer that is mounted where the clock would be on a 108.  Won't do anything for a pagoda but a good item to sell or trade.  Seat belts mostly the same (Kangol),    lots of stuff.   But really the 109 has parts that are unique to a 109 that are worth some money.

There are no body parts from non-Pagodas that fit Pagodas that I know of.  Also no interior parts with the exception of part of the seat mechanism from a 111 coupe, which is probably worth as much for a 111 coupe as it is for a pagoda. 
Scott Allen
'67 250 SL (early)
Altadena, California

KevinC

  • Guest
Re: Parts from newer cars for our pagodas?
« Reply #2 on: March 13, 2014, 22:08:49 »
How about wheels and/or hubcaps? Side marker lights if they are or can be made clean?

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: Parts from newer cars for our pagodas?
« Reply #3 on: March 16, 2014, 21:41:52 »
How about wheels and/or hubcaps? Side marker lights if they are or can be made clean?
I think that there is some demand for steel wheels that take the dog dish hubcaps and chrome beauty rings.  I don't think there is any demand for later steel wheels that take the full wheel cover.    But I don't think a steel wheel that takes a dog dish hubcap is a high dollar item at all.  It's not something I salvage when I see them, maybe I should start...
Scott Allen
'67 250 SL (early)
Altadena, California

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Parts from newer cars for our pagodas?
« Reply #4 on: April 04, 2014, 01:58:48 »
Is that a Mercedes Unimog next  to the red sedan ?
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Fintail

  • Guest
Re: Parts from newer cars for our pagodas?
« Reply #5 on: April 04, 2014, 06:27:30 »
would like to buy the engine mounted oil cooler jacket that bolts in the block on 189 engine

Thank you

John