Radio braket in side dash to hold Becker Gand Prix

[Bob G ✝︎]

Dear Gentlemen;

I need you help. can some one providee me with a picture of the gracket in side the dash to hold a Becker Grand pix with separate
Amplifier. You help would be more then appreciated.
Send to my emai at krwaxbz At yahoo.com
Sincerely
 Bob Geco
Vin #113044012019o6
build date April 1968 European delivery

[Rolf-Dieter ✝︎]

Hi Bob,

Did you scan thru the Technical manual? Perhaps you find what you need there?

Check it out click here ---> http://www.sl113.org/wiki/Electrical/Radio

Good luck.

I installed my Becker radio that came with the car replicating a tape deck that the last owner had instead of the Becker radio. Using the Tech Manual made installation easy for me.

[Bob G ✝︎]

Dear. Mr. Deiter.
Thank you for referring me to  the technical page for Becker radio
care and problem solving. While this is a very helpful page that I didn't
know exist. I still could not fine a picture of the radio bracket the secures 
my Becker Grand Pix when reinstalling my radio. I hope that someone currently
working on a 1968 280SL can take a picture of this bracket inside were the radio
is slid into.
Please pass the word on. I talked with Becker and this bracket is no longer
available.
Sincerely
Bob Geco
Long Beach, CA
1968 280SL 11304401201906
April production 1968

[hkollan]

Hi,

Attached is a picture of the separate amp with the original bracket in my  '68 280 SL #1022

The radio bracket, can be bought here:  

https://www.koenigs-klassik-radios.de/en/spare-parts/blaupunkt/radio-holder-for-mercedes-pagode-h11/a-36109/



Hans

[KevinC]

Here's an alternate version...

http://www.authenticclassics.com/Becker-Amplifier-Mounting-Bracket-p/auth-004632.htm