« previous next »
Pages: [1]

Author Topic: Hole in Trunk/Boot  (Read 6653 times)

Matt113

  • Guest
Hole in Trunk/Boot
« on: March 09, 2015, 17:15:41 »
Hello All,

Well the restoration is coming along slowly but surely. We're a bit confused as to what the hole from the trunk/boot to the soft top storage compartment is for (see image).
Any ideas? Thanks
Matthew
Logged

mmizesko

  • Pagoda SL Board
  • Gold
  • *****
  • USA, OH, New Albany
  • Posts: 995
Re: Hole in Trunk/Boot
« Reply #1 on: March 09, 2015, 17:56:05 »
Most use it to open the soft top boot when the cable or handle breaks, or when the soft top gets stuck in the boot.

Mice use it to get into your soft top and eat it.

Mike Mizesko
Columbus, OH
Logged
1970 280SL 291H Dark Olive

Matt113

  • Guest
Re: Hole in Trunk/Boot
« Reply #2 on: March 09, 2015, 18:03:19 »
 :) :) Thanks Mike! No mice yet, fingers crossed.

Matthew
Logged

jameshoward

  • Associate Member
  • Platinum
  • ******
  • United States, New Jersey (formerly of London)
  • Posts: 1570
Re: Hole in Trunk/Boot
« Reply #3 on: March 09, 2015, 20:33:33 »
And never too early to set up the emergency opening mechanism utilising some strong cord and said hole!
Logged
James Howard
1966 LHD 230SL

Matt113

  • Guest
Re: Hole in Trunk/Boot
« Reply #4 on: March 10, 2015, 16:10:47 »
Ah, how does the "Emergency opening mechanism" work?
Logged

jameshoward

  • Associate Member
  • Platinum
  • ******
  • United States, New Jersey (formerly of London)
  • Posts: 1570
Re: Hole in Trunk/Boot
« Reply #5 on: March 10, 2015, 20:47:04 »
Tie a piece of string (para cord; something strong) onto the obvious appropriate place on the catch and feed it into the boot! Take a look. You'll figure it out in a second.
Logged
James Howard
1966 LHD 230SL

Baybear

  • Full Member
  • Regular
  • **
  • USA, VA, Midlothian
  • Posts: 78
Re: Hole in Trunk/Boot
« Reply #6 on: March 11, 2015, 18:57:55 »
Does anyone know the part # for the rubber grommet that covers the hole?
Will
Logged
Will Milby
1970 300SEL 6.3, 1971 280SL, 1972 300SEL 4.5, 1972 Super Beetle, 1998 SL500, 2010 350 GLK, 2012 SLS AMG

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4735
Re: Hole in Trunk/Boot
« Reply #7 on: March 11, 2015, 22:05:06 »
Always open - never covered, thus no p/n.
1 item less to worry about!  ;)
Logged
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Baybear

  • Full Member
  • Regular
  • **
  • USA, VA, Midlothian
  • Posts: 78
Re: Hole in Trunk/Boot
« Reply #8 on: March 12, 2015, 14:39:58 »
Quote from: 66andBlue on March 11, 2015, 22:05:06
Always open - never covered, thus no p/n.
1 item less to worry about!  ;)
I thought that was the case however I have been to pagoda events inwhich I saw more than one car rightly or wrongly with this hole covered.
Will
Logged
Will Milby
1970 300SEL 6.3, 1971 280SL, 1972 300SEL 4.5, 1972 Super Beetle, 1998 SL500, 2010 350 GLK, 2012 SLS AMG

49er

  • Full Member
  • Platinum
  • ******
  • USA, CA, El Dorado Hills
  • Posts: 1426
Re: Hole in Trunk/Boot
« Reply #9 on: March 12, 2015, 18:35:56 »
No "plug" or cover on mine.

John
Logged
1969 280SL 003820
Un Restored, All Original, including the paint
Original Owner, Purchased September 18, 1968
4 speed manual, PS. 77217 miles
7280 miles since awoken from her 20+ yr "nap" in 2010

JamesL

  • Full Member
  • Platinum
  • ******
  • United Kingdom, London, London
  • Posts: 3610
Re: Hole in Trunk/Boot
« Reply #10 on: March 12, 2015, 19:13:21 »
Quote from: 66andBlue on March 11, 2015, 22:05:06
Always open - never covered, thus no p/n.
1 item less to worry about!  ;)

It's a Sports Leicht, after all. MB were concerned about saving weight
Logged
James L
Oct69 RHD 280 in DB906 with cognac leather

Tomnistuff

  • Full Member
  • Gold
  • *****
  • Canada, Qc, Levis
  • Posts: 947
Re: Hole in Trunk/Boot
« Reply #11 on: March 12, 2015, 22:10:37 »
I can't imagine why that hole would need to be covered.  The holes for the two hinges are many times larger and cannot be closed.

Tom Kizer
Logged
Apparently late 1966 230SL 4-spd manual (Italian Version)
Owned since 1987 and wrapping up a full rotisserie restoration/modernization.
Was: Papyrus White 717G with Turquoise MBtex 112 and Kinderseat
Is: Dark Blue 332G with Dark Blue Leather (5300, I think)

Baybear

  • Full Member
  • Regular
  • **
  • USA, VA, Midlothian
  • Posts: 78
Re: Hole in Trunk/Boot
« Reply #12 on: March 12, 2015, 23:57:59 »
Quote from: Tomnistuff on March 12, 2015, 22:10:37
I can't imagine why that hole would need to be covered.  The holes for the two hinges are many times larger and cannot be closed.

Tom Kizer

I do not think we are talking about the hinges, but a hole dead center just above the floor of the trunk
Logged
Will Milby
1970 300SEL 6.3, 1971 280SL, 1972 300SEL 4.5, 1972 Super Beetle, 1998 SL500, 2010 350 GLK, 2012 SLS AMG

Tomnistuff

  • Full Member
  • Gold
  • *****
  • Canada, Qc, Levis
  • Posts: 947
Re: Hole in Trunk/Boot
« Reply #13 on: March 13, 2015, 00:01:44 »
No, I understand that.  I just question why close the hole when it's not the only one and it is, by far, smaller than the others.  Closing it serves no purpose.

Tom K.
Logged
Apparently late 1966 230SL 4-spd manual (Italian Version)
Owned since 1987 and wrapping up a full rotisserie restoration/modernization.
Was: Papyrus White 717G with Turquoise MBtex 112 and Kinderseat
Is: Dark Blue 332G with Dark Blue Leather (5300, I think)
Pages: [1]
« previous next »