Author Topic: Oh dear - 250sl Pagoda poss engine rebuild reqd - Nottingham - any specialists??  (Read 5075 times)

redcrosbyr

  • Guest
Hi everyone - longtime since i posted.....phew...i wish i hadn't fallen in love with these pagodas.....anyway.....cosmetically my car is now 95%...mechanically (and i am no techy) the "big ends and mains" need replacing...does this mean i need an engine rebuild....other than a tune up i've had nothing done to the engine.....anyone know of an independent engineer who will actually take on a classic merc engine near Nottingham/UK...or i could have the engine taken out and shipped somewhere....any advice much appreciated.....damn cars!

Oh yes...would the big ends and mains "going/banging" necessarily justify the expense of an engine rebuild?....Also it just 'stopped' the other day - engine was revving but not pulling with oil pouring out from under car....was told by recovery man it was "gearbox oil".....dear oh dear oh dear....

Thanks guys..Im off to get some therapy !

Fintail

  • Guest
Hi

Im in Stoke, often visit at home for accesments usually injection set up. Happy to rebuild if that is required

John 07891070248

Rolf-Dieter ✝︎

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, London
  • Posts: 3683
    • Best Pagoda Site second to none!
Check out our Vendor List ...

There are several UK listings. Good Luck ... hope it's nothing too major.

Click here and scroll down ----> http://www.sl113.org/wiki/Suppliers/Start

Dieter
DD 2011 SL 63 AMG and my 69 Pagoda 280 SL

redcrosbyr

  • Guest
Thanks Rolf-Dieter!!

rgafitanu@gmail.com

  • Guest
If you have automatic transmission it may not be that bad. A loose fitting on the transmission may cause the big leak and it will not move anymore. It happened to me a couple of times.
Radu

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2924
    • http://www.colinferns.com
FWIW, I'm currently on my 10th pagoda engine build in the last 12 months......

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
FWIW, I'm currently on my 10th pagoda engine build in the last 12 months......


 You've had 10 call backs in one year!? :o ;) ;) ;)
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2924
    • http://www.colinferns.com
The kind of joke that can easily get misunderstood without context Dan!

No comebacks.

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
The kind of joke that can easily get misunderstood without context Dan!

No comebacks.

Uh......... I figured at least three winks ought to have done it but maybe I should have used a few more.  OK, here goes..........   ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;)
That should cover any misunderstandings, I hope.

I figure you probably know more than I would over a large general area covering many different fields as I know nothing about aircraft. I also figure we'd make a formidable team if we were to join forces.  :)


If I lived in your area and couldn't do the work myself, I would certainly have you rebuild my engine.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2924
    • http://www.colinferns.com
Thanks Dan,
The respect is mutual.

Colin

JamesL

  • Full Member
  • Platinum
  • ******
  • United Kingdom, London, London
  • Posts: 3610
+1 for Stick. Mine is one of the 10. Indeed, looking forwards to putting some more "running in" miles on it over the next couple of weeks
If you need it trailering to Richmond, call Mel Spear at Flying Blue Dog.
James L
Oct69 RHD 280 in DB906 with cognac leather

rigger29

  • Guest
Unfortunately, I'm in the same boat.  I spoke to the SL shop yesterday who gave me the contact details for the garage that does all their rebuilds.

The company is MJA Engineering - Contact Martin 01527-880081.

Cheers......Mark