pedal linkage......

[erickmarciano]

Hi Guys
got all the engine linkage set well but from progressive part down I don't think its set well.
the rod going down to the pivot is under tension when I try to connect to the progressive linkage on intake.I tried lengthening it but its over extended no thread on the rod left.
should I lengthen rod #45?
the gas pedal also feels like its under tension.
anyone got a link on adjusting the pedal---firewall link---#45---vertical link to progressive block on intake?
in what order?
thanks

[Tyler S]

You may need to adjust the nut and bolt #51 and #53 to get your pedal and cross rod on the firewall in the proper position. The lever in this location is slotted for adjustment.

[erickmarciano]

I am having a real hard time adjusting the pedal/ spring position/ link from engine to the progresive part
Cant find the procedure anywhere

My car is a manual

[ja17]

Erick,

When the accelerator pedal is on the floor stop, the intake venture flap should be full open. The linkage tour should get you through the rest.

[erickmarciano]

There are 3 adjustments I am confused on how to adjust ( what to do first)
1-The firewall one with the pedal and what hole  to place the spring
2- the rod going to the engine pivot
3- rod from engine pivot to intake

Thanks