Author Topic: 1983 Euro 280SL cylinder head removal  (Read 3170 times)

joereese55@msn.com

  • Guest
1983 Euro 280SL cylinder head removal
« on: March 09, 2017, 14:43:26 »
I need some help on removing my cylinder head. All the attachments are detached and I'm down to the timing chain tensioner and I'm not exactly sure what my next step should be. Any advice,  suggestions  is highly appreciable. The car is a euro 280SL 1983 V-6 double overhead cam.

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7219
  • Benz Dr.
Re: 1983 Euro 280SL cylinder head removal
« Reply #1 on: March 09, 2017, 17:37:05 »
Sounds like you have a 107 280SL?  While it is a twin cam engine, it's an inline six. Look inside the chain case for any smaller head screws that you may have missed.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Jack Jones

  • Full Member
  • Silver
  • ****
  • Canada, ON, Milton
  • Posts: 396
Re: 1983 Euro 280SL cylinder head removal
« Reply #2 on: March 10, 2017, 01:12:34 »
I would recommend purchasing a 110 engine manual to provide many of the details unique to this engine and also for torque specs, tensioner removal and installation etc. The cam housing needs to be removed prior to the actual cylinder head also.

Jack
Jack Jones                                                                                                   
1970 280SL 4 Speed
1984 280SL 5 Speed

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7219
  • Benz Dr.
Re: 1983 Euro 280SL cylinder head removal
« Reply #3 on: March 10, 2017, 05:28:51 »
I would recommend purchasing a 110 engine manual to provide many of the details unique to this engine and also for torque specs, tensioner removal and installation etc. The cam housing needs to be removed prior to the actual cylinder head also.

Jack

I've done it without removing the can housing ( I think ) but it's been many years since I worked on one. A 113 engine is easy by comparison.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7410
Re: 1983 Euro 280SL cylinder head removal
« Reply #4 on: March 10, 2017, 05:33:14 »
Yes you will definitely need to read-up on re-setting and installing the chain tensioner.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

joereese55@msn.com

  • Guest
Re: 1983 Euro 280SL cylinder head removal
« Reply #5 on: March 10, 2017, 07:22:00 »
You guys are awesome! I did order the service manual through emanualonline. It took forever to download 7,000+pgs. with no contents pg. The tentioner and timming chain worries me. Don't want to mess with the chain. Thanks!