« previous next »
Pages: [1]

Author Topic: 1970 280SL Valve Compression Tool  (Read 1473 times)

MSmith

  • Inactive
  • Junior Level
  • *
  • USA, CA, Rolling Hills Estates
  • Posts: 19
1970 280SL Valve Compression Tool
« on: February 11, 2019, 19:54:35 »
Hi,
Adjusting my valves and...
Looking to buy or rent (2-3 days) valve compression tool for my 1970 280SL[/b]
..... three stuck valve adjustment nuts. :-[
Mark Smith
Logged

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: 1970 280SL Valve Compression Tool
« Reply #1 on: February 12, 2019, 13:13:12 »
I have one you can borrow. No charge.  Unfortunately (or fotunately) I am in Mexico until Saturday.  I can send it next week.  PM me your address. 
Logged

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: 1970 280SL Valve Compression Tool
« Reply #2 on: February 12, 2019, 13:54:22 »
Logged
/Hans S

MSmith

  • Inactive
  • Junior Level
  • *
  • USA, CA, Rolling Hills Estates
  • Posts: 19
Re: 1970 280SL Valve Compression Tool
« Reply #3 on: February 14, 2019, 23:57:05 »
Thanks Everyone,
I did complete the valve adjust on the car. I was able to lift with hex wrench the rocker arms out of the way to get a 17mm socket on the stuck valve adjust screws... I kinda read the valve guide tour as one needs to compression the spring to lift the rocker out of the way..who knew it was that easy. O'well all is good with my 1970 280SL...once the rain clears...back on the road.
Mark
Logged
Pages: [1]
« previous next »