Author Topic: 2-pole terminal for Bosch Supertone horn  (Read 4671 times)

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4734
2-pole terminal for Bosch Supertone horn
« on: August 01, 2019, 03:13:29 »
Looking for a used or new 2-pole spade terminal for a later Bosch horn.
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: 2-pole terminal for Bosch Supertone horn
« Reply #1 on: August 09, 2019, 02:21:37 »
Those are single spades with rubber boots.

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1453
Re: 2-pole terminal for Bosch Supertone horn
« Reply #2 on: August 09, 2019, 06:54:43 »
Hi Alfred,
I know it as 2 single fully insulated receptacles (voll isolierte Flachstecker) too, in black with round end to fit in the horn.
... Wolfgang

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4734
Re: 2-pole terminal for Bosch Supertone horn
« Reply #3 on: August 09, 2019, 18:05:03 »
Shvegel, it is not a rubber boot but hard plastic.

Wolfgang, actually it is one piece with two separate feed-through poles.

Fortunately I found one in white and it is on order.


Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1453
Re: 2-pole terminal for Bosch Supertone horn
« Reply #4 on: August 10, 2019, 08:07:56 »
Hi Alfred,
ok, never seen. Was this horn ever used in our cars?
...Wolfgang

teahead

  • Associate Member
  • Gold
  • *****
  • USA, WA, Des Moines
  • Posts: 781
  • aka "Rob"
Re: 2-pole terminal for Bosch Supertone horn
« Reply #5 on: August 10, 2019, 14:35:01 »
Shvegel, it is not a rubber boot but hard plastic.

Wolfgang, actually it is one piece with two separate feed-through poles.

Fortunately I found one in white and it is on order.

Where'd you get it?
1970 280SL auto, AC - aka "Edelweiss"

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4734
Re: 2-pole terminal for Bosch Supertone horn
« Reply #6 on: August 10, 2019, 17:44:52 »
Hi Alfred,
ok, never seen. Was this horn ever used in our cars?
...Wolfgang
Hi Wolfgang, no, never on a W113 car. I believe these horns were made around 1990-2000 and few came with the 290Hz/345Hz combination, most were 325Hz/400Hz.
I found this (290Hz/345Hz) horn pair at a swap meet and thought I could just exchange the connector for the ring-type connector. Well, as you can see that does not work.
They show up occasionally on eBay.
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Shvegel

  • Inactive
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: 2-pole terminal for Bosch Supertone horn
« Reply #7 on: August 12, 2019, 03:00:35 »
Alfred,
I see now.  I thought you were looking for the terminals that plug into your horn not to replace the cracked one you had.

m300cab

  • Associate Member
  • Silver
  • ****
  • USA, Pennington New Jersey
  • Posts: 375
Re: 2-pole terminal for Bosch Supertone horn
« Reply #8 on: August 14, 2019, 13:37:41 »
i have an old 113 horn if your interested
Michael Parlato

teahead

  • Associate Member
  • Gold
  • *****
  • USA, WA, Des Moines
  • Posts: 781
  • aka "Rob"
Re: 2-pole terminal for Bosch Supertone horn
« Reply #9 on: August 14, 2019, 14:22:37 »
Alfred,
I see now.  I thought you were looking for the terminals that plug into your horn not to replace the cracked one you had.

Me too.

😕
1970 280SL auto, AC - aka "Edelweiss"