Author Topic: Vinyl Strips to Ease Soft Top Raising and Lowering  (Read 2969 times)

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 390
  • 280SL Mfg date AUG 1969
Vinyl Strips to Ease Soft Top Raising and Lowering
« on: February 05, 2020, 16:06:03 »
I once ran across someone showing the use of vinyl strips to ease the raising and lowering to the soft top and to also save on the wear and tear of the soft top cover. I tried to do a search for it, but didn't find anything here. It might have been somewhere else.

Does anyone recall seeing that and if so, do you know where I might look to get that info?

Best,

Roland
RB

mrfatboy

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Rancho Santa Fe
  • Posts: 1339
    • Mrfatboy
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #1 on: February 05, 2020, 16:24:40 »
I just used plastic folders from office depot. $1. Cut to size. 

People have also used empty plastic containers, etc that have been cut to size.

Just use something thin, smooth,  flexible, and durable.
1969 280sl (Aug 1968 build)
Signal Red
4 Speed

Mike Hughes

  • Full Member
  • Platinum
  • ******
  • USA, VA, Blue Grass
  • Posts: 1750
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #2 on: February 06, 2020, 01:04:23 »
 A couple of Hefty 1-gallon zip-lock freezer bags work a treat!  Freezer bags are much thicker material than sandwich bags.
- Mike Hughes  -ô¿ô-
  1966 230SL Auto P/S
  Havana Brown (408)
  Light Beige (181)
  Cream M-B Tex (121)

450sl

  • Full Member
  • Silver
  • ****
  • Netherlands, Gelderland, zelhem
  • Posts: 494
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #3 on: February 06, 2020, 09:13:31 »
When you buy a softtop from  Khm you get 3 pcs of leftover rearwindow material extra.   (Soft-Pvc ).


kampala

  • Full Member
  • Platinum
  • ******
  • USA, CA, Beach Cities
  • Posts: 1247
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #4 on: February 06, 2020, 13:15:43 »
from tech manual - look at section that says "protecting soft top"

photos are a bit difficult to see but read the notes as they are pretty clear.

https://www.sl113.org/wiki/Tops/SoftTop

250sl - later - manual
280sl - 1971 - Auto - LSD

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 390
  • 280SL Mfg date AUG 1969
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #5 on: February 08, 2020, 17:39:46 »
from tech manual - look at section that says "protecting soft top"

photos are a bit difficult to see but read the notes as they are pretty clear.

https://www.sl113.org/wiki/Tops/SoftTop

That is the description of what it is I am looking for. Someone once posted either pictures or video of the process. That was what I was trying to find.
Thanks very much,
Roland
RB

Mike H

  • Full Member
  • Junior Level
  • *
  • Australia, New South Wales, East Ballina
  • Posts: 38
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #6 on: February 09, 2020, 05:29:00 »
Check this clip. It covers both tops.

brabus280sl hardtop installation

Mike.

mbzse

  • Full Member
  • Platinum
  • ******
  • Sweden, Stockholm, Stockholm
  • Posts: 1748
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #7 on: February 09, 2020, 12:07:30 »
I was surprised, this video that Mike mentions is somewhat useful. Shows use of "shoehorn" pieces to save rubber seals when lowering soft top.
A note: It is a good thing to put a towel or roll inside the rear vinyl soft top window when folding, to avoid sharp crease
https://www.youtube.com/watch?v=dcvG2HfMat4&t=99s
/Hans S

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 390
  • 280SL Mfg date AUG 1969
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #8 on: February 09, 2020, 14:44:30 »
Perfect! That is the video I have been looking for. They put the 2 vinyl pieces on either side before folding down the soft top.

Thank you to all,
Best,
Roland
RB

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5494
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #9 on: February 09, 2020, 17:11:27 »
A note: It is a good thing to put a towel or roll inside the rear vinyl soft top window when folding, to avoid sharp crease


I think this is important. We have lots of ideas on this in posts on the forum, e.g. pool noodles. I took the pipe foam insulation, about 10cm in diameter and covered it with felt.
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 390
  • 280SL Mfg date AUG 1969
Re: Vinyl Strips to Ease Soft Top Raising and Lowering
« Reply #10 on: February 09, 2020, 17:19:51 »
I think this is important. We have lots of ideas on this in posts on the forum, e.g. pool noodles. I took the pipe foam insulation, about 10cm in diameter and covered it with felt.

Sounds like another good addition to the storage process.
RB