Author Topic: hood nut plates  (Read 3492 times)

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2921
    • http://www.colinferns.com
hood nut plates
« on: June 15, 2020, 17:01:16 »
Many of you are familiar with the fixing of the hood (bonnet) hinges.
I've repaired many of these hood nut plates in the past but have always had the original nut plates to work with.
I have a hood that someone else has butchered in the past and there's no trace left of the original fittings.
Does anyone have a scrap hood that they could cut these fitting out of and sell me?
(in future I'll make a drawing so I can make them from scratch!)
I've tried all the usual suppliers but without success.
Budsbenz have a kit that includes a hood frame that I do not require and I'm having difficulty getting them to sell me just the nut plates.

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4734
Re: hood nut plates
« Reply #1 on: June 15, 2020, 18:21:12 »
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2921
    • http://www.colinferns.com
Re: hood nut plates
« Reply #2 on: June 16, 2020, 07:21:48 »
That's what I'm after but I read in another thread that he can no longer get them from his German supplier.

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2921
    • http://www.colinferns.com
Re: hood nut plates
« Reply #3 on: June 16, 2020, 10:04:45 »
Ddin't somebody post on here recently that they'd just had an acident and that their car will need a new front end? That damaged hood could provide the nut plates.

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1449
Re: hood nut plates
« Reply #4 on: June 16, 2020, 10:53:52 »
... but the hood doesn't look to bad.
...WRe

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2921
    • http://www.colinferns.com
Re: hood nut plates
« Reply #5 on: June 16, 2020, 11:02:12 »
Difficult to tell from that picture but if I was the repairer and the insurance were paying it would definitely have a new one. Does that car belong to a member here?

JamesL

  • Full Member
  • Platinum
  • ******
  • United Kingdom, London, London
  • Posts: 3604
Re: hood nut plates
« Reply #6 on: June 16, 2020, 11:16:13 »
Colin, I think this was in Germany so Achim may know... (he obviously knows each and every Pagoda and it's owner in Germany ;))
James L
Oct69 RHD 280 in DB906 with cognac leather

Leester

  • Full Member
  • Silver
  • ****
  • USA, VA, Lorton
  • Posts: 440
Re: hood nut plates
« Reply #7 on: June 17, 2020, 17:18:51 »
You might check with Gernold. I purchased a set from him about 3 weeks ago.
Lee Backus
1963 220SE Cabriolet
1970 280SL (reassembling - hopefully soon)
1978 450SL (disassembled for paint)
1985 500SEC

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2921
    • http://www.colinferns.com
Re: hood nut plates
« Reply #8 on: June 17, 2020, 17:26:39 »
Thanks, I will, I did and he has!  ;D
« Last Edit: June 18, 2020, 14:21:23 by stickandrudderman »