Author Topic: well, looks like I'll need a radio plate too (230SL)  (Read 3435 times)

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
well, looks like I'll need a radio plate too (230SL)
« on: February 02, 2021, 20:14:21 »
I've got a slimface Europa TG on the way from Becker Autosound and I just discovered (like an hour ago) that my radio plate has been cut to fit a later (larger DIN) radio. Since I have a 230/250 radio plate, I just assumed I had a slimface radio in the car- it never occurred to me that a PO had cut the plate - until I measured it....rats!
« Last Edit: February 02, 2021, 22:30:19 by Charles 230SL »

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5495
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

114015

  • Full Member
  • Platinum
  • ******
  • Germany, Nordrhein-Westfalen, Tecklenburg
  • Posts: 2080
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #2 on: February 03, 2021, 00:15:21 »


Charles,

Bud's and Authenticclassic should have this dash piece as well.
Ask them.
Or you'll find an original one (NLA by the way): A113 689 0139.

 ;)

Achim

Achim
(Germany)

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #3 on: February 03, 2021, 01:25:47 »
Charles, Bud's and Authentic classic should have this dash piece as well. Ask them. Or you'll find an original one (NLA by the way): A113 689 0139. ;)
Achim
Yes, I know - its just a hassle to have to match/buy the paint, get my paint 'stuff together, and spray a new one. I've got some dark blue (DB 332) leftover from when I sprayed the wheels and hubcaps..but it'll need to be an exact match with the dash and glovebox door - which with my luck, it won't be :(.  no big deal, I just wasn't expecting the aggravation.   
« Last Edit: February 03, 2021, 12:56:21 by Charles 230SL »

Rolf-Dieter ✝︎

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, London
  • Posts: 3683
    • Best Pagoda Site second to none!
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #4 on: February 03, 2021, 05:05:38 »
Charles, I am sure you will find your radio plate. I’ve not turned my radio on in 7 years, I prefer to listen to my engine, in time I am certain you will too.

If you do need a radio, use your cell phone wireless with this have a peek below. I have one for 5 years and love it when I do like to listen to my own music :)

Dieter

—-> https://www.amazon.ca/Jawbone-JAMBOX-Wireless-Bluetooth-Speaker/dp/B004E10KI8
DD 2011 SL 63 AMG and my 69 Pagoda 280 SL

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #5 on: February 03, 2021, 16:27:24 »
Or you can put in a big-face Becker.  I am sorry this has happened, particularly after you spent $$$ for what I assume is a nice TG.  Post pic of radio.
Scott Allen
'67 250 SL (early)
Altadena, California

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #6 on: February 03, 2021, 16:57:45 »
I took out a big-face Europa MU (which I mistook to be a slimface). I figured since I had a radio plate it was a slimface - I didn't realize the plate had been cut to accommodate a big face radio. I've not received the TG yet - I'll ask Tom to send a picture before it ships. 

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #7 on: February 03, 2021, 17:02:30 »
I took out a big-face Europa MU (which I mistook to be a slimface). I figured since I had a radio plate it was a slimface - I didn't realize the plate had been cut to accommodate a big face radio. I've not received the TG yet - I'll ask Tom to send a picture before it ships.
You might see if you can cancel your order unless you are planning on switching the dash metal plate...
Scott Allen
'67 250 SL (early)
Altadena, California

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #8 on: February 03, 2021, 18:08:21 »
hey scoot, I plan to get a new radio plate for the Europa TG - https://www.authenticclassics.com/Mercedes-230SL-250SL-Dashboard-Radio-Mount-Plate-p/auth-003066.htm.. I just hope I don't run into anymore surprises

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #9 on: February 03, 2021, 18:36:06 »
hey scoot, I plan to get a new radio plate for the Europa TG - https://www.authenticclassics.com/Mercedes-230SL-250SL-Dashboard-Radio-Mount-Plate-p/auth-003066.htm.. I just hope I don't run into anymore surprises
I'm glad you are going that direction.  Much better to have an actual small-face radio in the dash.  Yay!
Scott Allen
'67 250 SL (early)
Altadena, California

114015

  • Full Member
  • Platinum
  • ******
  • Germany, Nordrhein-Westfalen, Tecklenburg
  • Posts: 2080
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #10 on: February 03, 2021, 19:08:13 »
Quote
hey scoot, I plan to get a new radio plate for the Europa TG - https://www.authenticclassics.com/Mercedes-230SL-250SL-Dashboard-Radio-Mount-Plate-p/auth-003066.htm.. I just hope I don't run into anymore surprises

Yes Charles,

Definitely!
Go for it!
Thumbs up!  ;) :D
Achim
(Germany)

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #11 on: February 12, 2021, 18:57:41 »
The new radio plate from Auth Classics arrived yesterday. Using the old plate as a template, I drilled holes for the chrome trim, then sanded and primed it. I plan to spray it dark blue/332 over the weekend. The Europa TG from Becker Autosound will be here next week so the paint will have at least 3 to 4 days to harden. Becker Autosound sent some pictures of the radio but they're not very good.. Tom Mitchell sounded pretty busy and I didn't want to bug him for more pictures. 
« Last Edit: February 12, 2021, 20:04:39 by Charles 230SL »

scoot

  • Full Member
  • Platinum
  • ******
  • USA, CA, Altadena
  • Posts: 2355
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #12 on: February 12, 2021, 19:49:38 »
The Europa TG from Becker Autosound will be here next week so the paint will have at least 3 to 4 days to harden. Becker Autosound sent some pictures of the radio but they're not very good..
Pics look good to me!  At least it is the right radio!
Yay for your project.
Scott
Scott Allen
'67 250 SL (early)
Altadena, California

Charles 230SL

  • Full Member
  • Gold
  • *****
  • USA, GA, Griffin
  • Posts: 665
  • 64 230SL
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #13 on: March 03, 2021, 23:07:13 »
I've been side-tracked these last couple of weeks but finally managed to install the Europa TG. It looks good, sounds good, so I guess this concludes my Winter project ;)..

DaveB

  • Full Member
  • Gold
  • *****
  • Australia, Western Australia, Lathlain
  • Posts: 953
Re: well, looks like I'll need a radio plate too (230SL)
« Reply #14 on: March 03, 2021, 23:55:23 »
It looks just right and will probably work great for decades. Worth the effort.
DaveB
'65 US 230sl 4-speed, DB190