Author Topic: 1969 280se w108 motor with injection pump  (Read 3249 times)

Fonzi

  • Guest
1969 280se w108 motor with injection pump
« on: September 23, 2021, 20:50:32 »
Wilmington Delaware

Still in the car in my driveway under cover today September 23, 2021

I believe one check valve is bad in the injection pump. 

I tested compression and people commented that it is very good, and I can post those numbers that I probably posted on Benzworld or peach parts.

I got the motor running for maybe a minute (30 seconds on a few occasions) with a fuel bottle and short pump (or possibly it was the tall pump I’ve got) in the engine bay probably back in April. 

I was going to keep the motor in case I wanted it for my 250se 4-speed project car which is in the garage.  The motor will come out of the rotted 1969 280se parts car sooner or later.  I need to reclaim my driveway space.  If someone wants the whole w108, that works for me.

Currently starting high with the asking price of….

$2800

Never offended by a lowball offer. 

That includes the whole car including the injection pump, transmission, rear end, etc.  heck, I will even throw in a working fuel pump at that number.  Oh, dog dish Steelies are on it too.  Oh, I think it also has a chip-free w108 windshield too.  That might be something I actually want. 



Fonzi

  • Guest
Re: 1969 280se w108 motor with injection pump
« Reply #1 on: September 24, 2021, 03:14:17 »
Price drop to $2700

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: 1969 280se w108 motor with injection pump
« Reply #2 on: September 24, 2021, 04:22:44 »
If it has the early sixteen bolt oil pan transmission  (same as pogoda) it might be much easier to sell, or at least a standard transmission?
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Fonzi

  • Guest
Re: 1969 280se w108 motor with injection pump
« Reply #3 on: September 24, 2021, 14:08:00 »
If it has the early sixteen bolt oil pan transmission  (same as pogoda) it might be much easier to sell, or at least a standard transmission?

I assume the internals of the transmission are burnt up, but I can check.  The VIN of the parts car is:
108.018.12.034536

Would that tell you if it should have the transmission? 

Do you guys know if there’s much benefit to keeping this engine in the car (other than it fitting in there nicely while I still have the car).

Fonzi

  • Guest
Re: 1969 280se w108 motor with injection pump
« Reply #4 on: September 24, 2021, 14:21:49 »

Here are the psi compression numbers:

Cyl OLD NEW
1 166 173
2 164 167
3 152 162, 165 (tested twice)
4 176 178
5 158 176
6 174 181

Fonzi

  • Guest
Re: 1969 280se w108 motor with injection pump
« Reply #5 on: September 24, 2021, 16:04:29 »
Pic of motor today 9/23/2021

Fonzi

  • Guest
Re: 1969 280se w108 motor with injection pump
« Reply #6 on: December 05, 2021, 00:05:43 »
A running 280sl project owner came by today and offered me $750 for the car and agreed to pay an additional $300 for the injection pump in the car that belongs to cth350

So I believe this engine is sold unless something changes in the next few hours.