Author Topic: New member, need some help :-[  (Read 6665 times)

taiginda

  • Guest
New member, need some help :-[
« on: February 22, 2022, 16:35:18 »
Hi, i'm tai from thailand.
I'm interest to buy the 250 sl model, but had some issue

my 250 sl car history as the seller said it's come from japan. but i see the orginal car reciepe that from usa (i didnt concern about this point)

The Problem is some document  that i found in this car (i guess it come with the car as original), The VIN number is 113043-12-000099 // but the VIN number at car is 113043-12-008099
and as i know the 250sl production number is just  5196. so i guess something went wrong with this vin number
the real VIN should be 113043-12-000099 // (the car already register in thailand as 008099, so i think i cant do anything about that)

what is your guy opinion ?? , should i invest in this car or not

anyway this car come with the price that below thailand market standard with many part of interior.

so if it's not the big deal, i will consider to buy this car

taiginda

  • Guest
Re: New member, need some help :-[
« Reply #1 on: February 22, 2022, 16:42:12 »
Anyway, some part of this car is had to fix also, and the engine is not original

SEB

  • Full Member
  • Silver
  • ****
  • Germany, Berlin, Berlin
  • Posts: 261
Re: New member, need some help :-[
« Reply #2 on: February 22, 2022, 18:06:10 »
Hi
I am not an expert in this field, but as an owner also of a 250SL Pagoda I feel a little called in to the board.
May be this is an human mistake?
As I purchased my 250SE Coupe, car with a replacement engine- in the data card was the engine number 129.980-12-xxxxxx, but on the replacement engine somebody stamp 129.981-12-xxxxxx.
Sebastian
1967 250 SL, 4 Speed, Euro spec, Tunis beige (462H),

lreppond

  • Full Member
  • Gold
  • *****
  • USA, CA, San Leandro
  • Posts: 639
Re: New member, need some help :-[
« Reply #3 on: February 22, 2022, 18:31:25 »
I’m am not an expert by any stretch.  But I think the least of this car’s problems is it’s VIN!   Parts seem to be missing and there appears to be visible rust damage.  I would guess the rust is far more extensive than what one can see. 

I would locate a trained professional, experienced in w113s, to fully inspect this car and give you an unbiased appraisal of its current condition and what it will take to get it safe and running properly.
~Len

1971 280 SL
576G red/251 Beige
4 speed manual
Family owned since new (father —> son)

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: New member, need some help :-[
« Reply #4 on: February 22, 2022, 18:38:39 »
That is strange indeed. It looks like the car at one time was owned by a U.S. Military member (APO address) maybe stationed in Germany (Mainz dealer invoice for repairs)
Maybe he bought it in Germany with US specs. Common practice for military members.
The VIN number stamped on the frame rail is indeed strange. It almost looks like it was restamped. Why would it say ..8099??
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

taiginda

  • Guest
Re: New member, need some help :-[
« Reply #5 on: February 22, 2022, 18:49:23 »
Hi
I am not an expert in this field, but as an owner also of a 250SL Pagoda I feel a little called in to the board.
May be this is an human mistake?
As I purchased my 250SE Coupe, car with a replacement engine- in the data card was the engine number 129.980-12-xxxxxx, but on the replacement engine somebody stamp 129.981-12-xxxxxx.
i Hope it will be this reason  ;D

I’m am not an expert by any stretch.  But I think the least of this car’s problems is it’s VIN!   Parts seem to be missing and there appears to be visible rust damage.  I would guess the rust is far more extensive than what one can see. 

I would locate a trained professional, experienced in w113s, to fully inspect this car and give you an unbiased appraisal of its current condition and what it will take to get it safe and running properly.

thank you for your recommend, as this model in thailand is very rare, so even i have to do restore and fix all problem it's still in a good price , if no problem with the vin number

That is strange indeed. It looks like the car at one time was owned by a U.S. Military member (APO address) maybe stationed in Germany (Mainz dealer invoice for repairs)
Maybe he bought it in Germany with US specs. Common practice for military members.
The VIN number stamped on the frame rail is indeed strange. It almost looks like it was restamped. Why would it say ..8099??

HI, that is my major concern. i didnt sure about the VIN number (may be mistake from restamped ? they miss the 0 to 8  :()
« Last Edit: February 22, 2022, 18:58:14 by taiginda »

john.mancini

  • Full Member
  • Gold
  • *****
  • USA, FL, Nokomis
  • Posts: 651
Re: New member, need some help :-[
« Reply #6 on: February 22, 2022, 19:17:07 »
Here's my two cents worth: Unless they give you that car for free, walk away and have an expert find you a worthy car.
John
65 230SL 519 Red 4-sp
98 911 cab
56 Ford F100
08 Porsche RS60 Spyder
23 Z4M40i

lreppond

  • Full Member
  • Gold
  • *****
  • USA, CA, San Leandro
  • Posts: 639
Re: New member, need some help :-[
« Reply #7 on: February 22, 2022, 19:22:22 »
Here's my two cents worth: Unless they give you that car for free, walk away and have an expert find you a worthy car.

I could not agree MORE!
~Len

1971 280 SL
576G red/251 Beige
4 speed manual
Family owned since new (father —> son)

Pinder

  • Full Member
  • Platinum
  • ******
  • USA, NJ, Edison
  • Posts: 1031
Re: New member, need some help :-[
« Reply #8 on: February 25, 2022, 00:28:03 »
the vin number stamping on the frame seems too clean but maybe the 250SL is supposed to look like that?
1970 280 SL Light Ivory DB 670. 4 Speed manual shift no AC Limited Slip Diff.
1997 Corvette C5 Silver. automatic
2015 BMW 320i xdrive
2021 Mercedes GLS450 Silver

mnahon

  • Full Member
  • Silver
  • ****
  • Canada, QC, Montreal
  • Posts: 436
Re: New member, need some help :-[
« Reply #9 on: February 25, 2022, 11:34:32 »
When I look at that first picture of the chassis stamping, it seems as though there's a thin strip of metal on which the numbers are stamped, as opposed to the numbers being stamped on the body sheet metal.

I agree with Pinder that the stamping seems very clean, maybe too clean. Below is the stamping from another 250SL that looks more authentic.

Also, there should be a VIN plate on the car, either on the firewall or on the driver door pillar. Is it missing?
« Last Edit: February 25, 2022, 11:45:22 by mnahon »
Meyer Nahon
Montreal, Canada
1968 MB 280SL Auto Euro LHD Silver
2021 Tesla Model 3

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 7055
Re: New member, need some help :-[
« Reply #10 on: February 25, 2022, 16:04:32 »
Obsessing over a VIN and the quality of the stamping is in a word, silly.
The very obvious question isn't answered: does it run? If so, how well?
My car when inherited, was in considerably worse condition than that shown. See attached.
As for paperwork, it didn't have ANY...nothing that could be used for registration or license and insurance. That all had to be created with an inspection by state authorities.
And yet, a beautiful car emerged from restoration after 2 years and 1,000 hours. [gulp]

So, you need to assess the condition of the car, how it runs, the extent of and damage and missing parts, and your ability to afford it in remote Thailand. How difficult is it to import parts in order to complete the restoration?. I'd tend to agree with SEB that a slipped digit in the VIN may have been a human error. It may be difficult to register properly in Thailand with such an error and if so that would need to be sorted out. But how well the car runs is the first consideration. Missing parts is another as some are exceedingly costly.
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2023 Ford Escape Hybrid
2024 Ford Mustang Mach Ex PEV

mBdrvr

  • Full Member
  • Senior
  • ***
  • USA, PA, Bethlehem
  • Posts: 169
Re: New member, need some help :-[
« Reply #11 on: February 25, 2022, 18:26:13 »
You shoukld contact Mercedes-Benz Owners Club of Thailand. They are recognized by Mercedes-Benz Classic as a "Brand" club.

They have a Facebook page and probably other ways to contact them.

Someone there will be able to guide you.
Paul Greenblatt
'70 280 SL
'66 250 SE Cabrio
'60 190 SL

Pinder

  • Full Member
  • Platinum
  • ******
  • USA, NJ, Edison
  • Posts: 1031
Re: New member, need some help :-[
« Reply #12 on: February 26, 2022, 03:12:29 »
Ill stick with my observation that that vin number appears to be scribed and not stamped. But maybe it does not matter as long as the vin is there and overall condition is good.
1970 280 SL Light Ivory DB 670. 4 Speed manual shift no AC Limited Slip Diff.
1997 Corvette C5 Silver. automatic
2015 BMW 320i xdrive
2021 Mercedes GLS450 Silver

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7220
  • Benz Dr.
Re: New member, need some help :-[
« Reply #13 on: February 26, 2022, 23:31:27 »
The VIN was stamped into the frame rail first and then the whole body was coated with primer when the car was built. The VIN area was covered with a piece of masking tape and then the body was painted.
This attempt was poorly masked and painted at one point but the numbering with font looks OK to me.   
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Jordan

  • Full Member
  • Platinum
  • ******
  • Canada, ON, Jordan
  • Posts: 1436
Re: New member, need some help :-[
« Reply #14 on: February 27, 2022, 03:35:41 »
Am I missing something?  There is no 250SL with the VIN number stamped on the frame rail.  I don't care how good or bad the car looks, the VIN doesn't exist so something is definitely off here.
Marcus
66 230SL  Euro 4 speed

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: New member, need some help :-[
« Reply #15 on: February 27, 2022, 13:42:24 »
Am I missing something?  There is no 250SL with the VIN number stamped on the frame rail.  I don't care how good or bad the car looks, the VIN doesn't exist so something is definitely off here.

Well, that's a point of view nobody has considered. I have no idea.
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5492
Re: New member, need some help :-[
« Reply #16 on: February 27, 2022, 13:51:35 »
Am I missing something?  There is no 250SL with the VIN number stamped on the frame rail.  I don't care how good or bad the car looks, the VIN doesn't exist so something is definitely off here.

That was the original question of the author of this thread. The documents provided are stating the correct VIN number. There is a wrong VIN number on the chassis. It is difficult to imagine how this could happen, not assuming someone's bad will. I foresee lots of legal issues and unnecessary uncertainty. I would walk away from this car, leaving it up to the current owner to clarify.
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

johnk

  • Full Member
  • Platinum
  • ******
  • USA, OH, Avon
  • Posts: 1166
Re: New member, need some help :-[
« Reply #17 on: February 27, 2022, 18:51:09 »
I certainly don’t know about Thailand but in Ohio I was told their is a not to difficult correction process if the VIN is off a number, specially if the wrong number is out of the manufacturers sequence.
John Krystowski
Avon Ohio
1968 Euro 280sl under restoration
2016 Jag F-Type R sold june 2021
1950 Alfa Romeo 6C 2500 SS For sale
2008 E350
2007 GL 450
2019 BMW 540

taiginda

  • Guest
Re: New member, need some help :-[
« Reply #18 on: February 27, 2022, 18:52:59 »
Hi, thank for all info from this community. It’s help me so much.

At first, the w113 market price in thailand is around 200,000-250,000 US.Dollar (not fully restore price) and nobody sell

This car is around 100,000 US.Dollar and i also cannot effort 200,000 US.Dollar
And for restoration cost, i can do it slowly

In thailand we have many case about iilegal car
But anyway this car the owner garuntee for the tranfer process ( in thailand it’s mean legal 95%)

The point is

1. 8099 is the wrong number right?(from the production number, i didn’t sure, does it can assume that 0001 is the first car and the 8099 is the number of production or it can be 8099 in theory)

2. I will find more picture at driver door pillar and firewall for more info .

IMO
If this wrong vin number, are from the human error or from  the  error of restamped  not from the other reason, personally, i thought i’m ok to take a chance.

(In thailand we have many complicated issue ex. Half frame car, VIN replace that the issue i worried)

Jordan

  • Full Member
  • Platinum
  • ******
  • Canada, ON, Jordan
  • Posts: 1436
Re: New member, need some help :-[
« Reply #19 on: February 27, 2022, 19:10:39 »
taiginda, the problem you have is that the VIN on the paperwork does not match the VIN for the car.  There were only 5196 250SL's made so the first 250SL would have been 000001 and the last one would have been 005196.  There was never a 250SL with the VIN ending in 008099.  It is not human error on the part of Mercedes Benz.

There should be a VIN tag on the firewall.  What does it tell you?  Is the VIN number on the frame rail stamped into the frame rail or into a steel strip attached to the frame rail?  It is difficult to tell from the picture. 
Marcus
66 230SL  Euro 4 speed

johnk

  • Full Member
  • Platinum
  • ******
  • USA, OH, Avon
  • Posts: 1166
Re: New member, need some help :-[
« Reply #20 on: February 27, 2022, 20:21:22 »
If the machine that stamped the VIN number jammed and stamped the number off by one digit do you thing Mercedes’ would destroy the chassis? They might have caught it until after the car was built.  Who knows.
John Krystowski
Avon Ohio
1968 Euro 280sl under restoration
2016 Jag F-Type R sold june 2021
1950 Alfa Romeo 6C 2500 SS For sale
2008 E350
2007 GL 450
2019 BMW 540

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 7055
Re: New member, need some help :-[
« Reply #21 on: February 27, 2022, 22:31:07 »
Is the car in Thailand now? If not, this may be too much trouble to sort out. If you cannot get further information on the actual car (as opposed to paperwork) to ensure that the paperwork is indeed for this car, this may be trouble...especially in Thailand. If the car is already there

As for accidental stamping that is entirely possible. One non-automotive item whose records are as meticulous as Mercedes, and whose products are restored just as often, are Steinway pianos. I have one that has been restored. The serial number of the piano indicated that it was one model, and delivered to a dealer in San Francisco in April, 1918. Well, that didn't really mesh with the information I had. In examining the piano further I found another stamping of the number on a hidden wood piece. That number was correct: and digits were transposed, purely by accident, in the restoration. Stuff happens. There was nothing nefarious in the case of my piano--but there are some unscrupulous people out there with cars.

One would think in a carefully crafted operation to cheat someone or present a car with a questionable background as honest, they would have at least made the numbers match!
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2023 Ford Escape Hybrid
2024 Ford Mustang Mach Ex PEV

MikeSimon

  • Full Member
  • Platinum
  • ******
  • USA, OH, North Royalton
  • Posts: 2477
Re: New member, need some help :-[
« Reply #22 on: February 28, 2022, 22:04:34 »
What about Jordan's comment about no 250SL with the VIN stamped on the frame rail? Is this correct?
1970/71 280SL Automatic
Sandy Beige
Parchment Leather
Power Steering
Automatic
Hardtop
Heated Tinted Rear Window
German specs
3rd owner

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 7055
Re: New member, need some help :-[
« Reply #23 on: February 28, 2022, 22:22:31 »
What about Jordan's comment about no 250SL with the VIN stamped on the frame rail? Is this correct?
Best if someone with an untouched 250SL answers that...but the answer would only be accurate if suffixed by "...from the factory as new."

It isn't uncommon for some people to stamp VINs or other identifying marks on some solid piece of a car. A data tag is--and can be--easily removed. Mine was. Had to have one fabricated. Thankfully the little tag stuck on the inside of the windscreen was there on mine...and even with two windshield changes they always put it back.
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2023 Ford Escape Hybrid
2024 Ford Mustang Mach Ex PEV

Pinder

  • Full Member
  • Platinum
  • ******
  • USA, NJ, Edison
  • Posts: 1031
Re: New member, need some help :-[
« Reply #24 on: March 01, 2022, 01:37:41 »
Sometimes you have to take a chance. If the metal is solid.
1970 280 SL Light Ivory DB 670. 4 Speed manual shift no AC Limited Slip Diff.
1997 Corvette C5 Silver. automatic
2015 BMW 320i xdrive
2021 Mercedes GLS450 Silver