Author Topic: injector pump rebuild needed  (Read 1842 times)

Bracq-Broke

  • Inactive
  • Junior Level
  • USA, OR, Portland
  • Posts: 7
injector pump rebuild needed
« on: March 18, 2022, 00:53:52 »
Leaking injector Pump.
Any recommendations for rebuilders in USA? (west coast pref)
Thanks.
Tom aka: Bracq-Broke
Portland, OR

lreppond

  • Full Member
  • Gold
  • *****
  • USA, CA, San Leandro
  • Posts: 639
Re: injector pump rebuild needed
« Reply #1 on: March 18, 2022, 01:56:14 »
I used Pacific Fuel Injection in South San Francisco.  Gus Pfister is the owner and is a master!  My entire FI system is now at peak performance and I could not be more pleased. 
~Len

1971 280 SL
576G red/251 Beige
4 speed manual
Family owned since new (father —> son)

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7217
  • Benz Dr.
Re: injector pump rebuild needed
« Reply #2 on: March 18, 2022, 04:29:59 »
What's leaking out and where? What model do you have?
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

roymil

  • Full Member
  • Senior
  • ***
  • USA, TX, Austin
  • Posts: 177
Re: injector pump rebuild needed
« Reply #3 on: March 18, 2022, 18:50:35 »
Yankee Diesel did an excellent rebuild of my injection pump.  It came back looking like new.  They are in Connecticut, but that made no difference with insured shipping via UPS.  I've heard great things about Pacific as well, but I chose Yankee mainly because I met Tom Horvath, the owner, at 2019 Pagodafest in San Diego and he gave a great presentation, plus spent a lot of time via email helping me debug the issues before I sent it in.   He clearly knows these pumps, as I'm sure Gus does too.     -Mark
Mark Miller
1968 280SL
Rode in his pagoda's first mile.

glcg123

  • Associate Member
  • Senior
  • ***
  • Canada, MB, Winnipeg
  • Posts: 105
Re: injector pump rebuild needed
« Reply #4 on: March 18, 2022, 18:51:33 »
I used Jerry at Fairchild Industries in Shingletown California (northern California). He does excellent work and he has the Bosch equipment for calibrating. His website is fuelinjectioncentre.com

George 1965 230SL

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1461
Re: injector pump rebuild needed
« Reply #5 on: March 18, 2022, 19:13:50 »
I used below.
https://www.dieselworld.com/
Recommended by engine rebuilder.
Great finish.
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI