Author Topic: Bearing bolt for the drum breaks  (Read 1345 times)

afibbe

  • Full Member
  • Senior
  • ***
  • USA, OH, Cincinnati
  • Posts: 100
  • 513-374-5600
Bearing bolt for the drum breaks
« on: March 09, 2023, 02:11:15 »
Is the part that connects to the shock support and the drum back plate removable and if so how?  The diagram I looked at called it a bearing bolt. Please see the attached picture.
Alex Fibbe
1966 230SL
USA, Cincinnati, OH

ctaylor738

  • Full Member
  • Platinum
  • ******
  • USA, VA, Falls Church
  • Posts: 1174
Re: Bearing bolt for the drum breaks
« Reply #1 on: March 09, 2023, 05:58:30 »
Uhh, isn't that the pivot for the brake shoes?
Chuck Taylor
1963 230SL #00133
1970 280SL #13027 (restored and sold)
1966 230SL #15274 (sold)
1970 280SL #14076 (sold)
Falls Church VA

dirkbalter

  • Full Member
  • Platinum
  • ******
  • USA, CA, Corona
  • Posts: 1480
Re: Bearing bolt for the drum breaks
« Reply #2 on: March 09, 2023, 15:36:43 »
Is the part that connects to the shock support and the drum back plate removable and if so how?  The diagram I looked at called it a bearing bolt. Please see the attached picture.

I looked at it too during the rebuild and concluded that is it not (relatively easy) removable. I left it in place, taped the critical surfaces for painting and insured that it moves freely afterwards.
Dirk
66 230 SL
70 280 SEL
53 CHEVY 3100
18 C300 COUPE
05 HD FLSTNI