250SL cold start spray nozzle

[cfm65@me.com]

Hi Guys,
The spray nozzle of the cold start valve is blocked and only lets out a few drops of fuel, during the start cycle.
I have tried to clear the blockage with a thin wire, as well as a sonic cleaning device.
Any advice will be much appreciated.
Regards
Chris
Cape Town
Anyone perhaps have a spare lying around?
cfm65@me.com

[Cees Klumper]

Do you have a model/part number or photo Chris? I may have one.

[cfm65@me.com]

Thanks Cees,
Cold start valve spray nozzle.
Regards
Chris

[Cees Klumper]

Aha. I believe these are removed from their holders by pulling out with pliers?

Here's my small collection, not sure whether they are all identical, and identical to yours Chris:

[cfm65@me.com]

Wow Cees, that is quite a selection.
I am leaving for the UK in a few days and will be there for a few weeks.
I will make contact from the UK and yes, the nozzle can be pulled off.
Please send me your e mail address and your price for one of the nozzles.
Regards
Chris
Cape Town
cfm65@me.com

[Paul & Dolly]

Hi Chris

I assume you have checked the online filter on the housing.

Paul

[cfm65@me.com]

Hi Paul,
Thanks for the heads-up.
I am not aware of the online filter on the housing.
Please help.
Regards
Chris

[Paul & Dolly]

Hi Chris
I seem to remember there is a small filter in the supply inlet fitting on the cold start valve.

Good luck
Paul