« previous next »
Pages: [1]

Author Topic: autotrans gearbox mount -now not changing gears smoothly  (Read 784 times)

markatspace

  • Associate Member
  • Junior Level
  • United Kingdom, England, Crewe
  • Posts: 4
autotrans gearbox mount -now not changing gears smoothly
« on: July 26, 2024, 16:19:02 »
1965 230SL auto.
I have just swapped out my autotrans gear box mount (over the tunnel) it had decayed, at the same time the prop flex disc looked rough so replaced that too.  When I drive the car now, the car holds onto gears for a long time. then when it does change up the change is really jerky and rough. all gears can be selected.  Any help or ideas please?
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: autotrans gearbox mount -now not changing gears smoothly
« Reply #1 on: July 27, 2024, 04:44:20 »
Check to see if the transmission linkage is not stuck. I am referring to the linkage going to the three position solenoid from the modulator.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

markatspace

  • Associate Member
  • Junior Level
  • United Kingdom, England, Crewe
  • Posts: 4
Re: autotrans gearbox mount -now not changing gears smoothly
« Reply #2 on: July 29, 2024, 12:34:35 »
thanks it was stuck. Now changed the angle of the gbox using the mount. much better. thank you!
Logged
Pages: [1]
« previous next »