Author Topic: cover plate on drive shaft intermediate bearing  (Read 768 times)

clunker

  • Full Member
  • Senior
  • ***
  • USA, NJ, Chatham
  • Posts: 109
cover plate on drive shaft intermediate bearing
« on: January 22, 2025, 02:31:02 »
Broad Arrow recently had an auction of a <10k miles 1969 280SL (https://www.broadarrowauctions.com/vehicles/jc24_r015/1969-mercedes-benz-280-sl-pagoda) which appeared to be in the original condition one might expect. There were extensive photographs of the vehicle, including of course the underside.

What caught my eye was a cover plate over the drive shaft intermediate bearing. I had never seen nor noticed one of these before, and a scan through the pristine W113 examples that have traded show none with this cover. I am intrigued as to whether this plate is original. If not, it is a curious add to such a low mileage vehicle. Does anyone have any insights?

(I did do a forum search here, but found no mention of this particular cover plate.)

I attach a marked up image from the Broad Arrow listing, the plate is circled in green.
Charles
1969 US 280SL 4-speed Red/Black
DB9 / 981 S / G300 SWB / CB750 / etc

114015

  • Full Member
  • Platinum
  • ******
  • Germany, Nordrhein-Westfalen, Tecklenburg
  • Posts: 2082
Re: cover plate on drive shaft intermediate bearing
« Reply #1 on: January 26, 2025, 20:59:46 »

Hi Charles,

Never see before, very odd.
I think I would know that after +30 years ownership of these cars.
Cannot imagine it is factory. What would be the parts no. of that plate?

I would guess - aftermarket.

BR
Achim
Achim
(Germany)