Author Topic: What's the Correct Tool Roll for a '68 250SL?  (Read 21861 times)

Douglas

  • Guest
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #25 on: January 27, 2006, 06:17:19 »
Hey, that's a nice kit. It's missing the big water pump pliers, but it has the early wooden-handled screwdriver. Very rare.

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4183
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #26 on: January 27, 2006, 06:18:48 »
Not exactly on topic, but here is a tool kit for the MB 600,  ebay item 4607026113. currently at USD 230, but still time left for sniping. Quite a complete set of tools, but then I guess they wanted to make sure the chauffeur could keep the machine running.

Jonny B
1967 250SL Auto
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7385
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #27 on: January 27, 2006, 06:18:58 »
Thanks Naj,

This looks like an original kit. The long handled waterpump pliers and wheel alignment tool are missing if they were in all W113 kits? Also notice the end treatment of the lug wrench. I believe the little claw is to remove the small early "hub cap" style cover. I believe the later W113 cars had lug wrenches with a blunt end for use on the full wheel covers.

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Naj ✝︎

  • Associate Member
  • Platinum
  • ******
  • United Kingdom, Surrey, New Malden
  • Posts: 3163
68 280SL

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4183
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

CraigD

  • Inactive
  • Senior
  • ***
  • USA, WA, Lake Tapps, WA
  • Posts: 189
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #30 on: January 27, 2006, 23:26:47 »
A little earlier, Naj posted a link for that tool kit selling on ebay.  Do you all think that the canvas looks like the original?  I was wondering if there should be a MB star stitched into the canvas...?

Craig
'70 280SL Euro, Manual, Leather, Luggage
Silver/Black

 
Craig
'70 280SL Euro
'55 300S Roadster
'29 Franklin Speedster
'37 Cord S/C Cabriolet (RHD)

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7385
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #31 on: January 28, 2006, 20:55:14 »
Hello Craig,

The common sedan canvas tool rolls have a Mercedes emblem and "Mercedes Benz" on the exterior. I have an original W113 kit also an see no markings. I suspect it is faded out or may have never had one. I suspect that most of the kits do have them.

Joe Alexander
Blacklick, Ohio
« Last Edit: January 28, 2006, 21:02:07 by ja17 »
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

TR

  • Guest
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #32 on: January 29, 2006, 00:10:47 »
Craig, Joe -- The canvas tool roll, that came with my car when I bought it over 20 years ago, is made of a sort of olive drab green flexible material, not particularly heavy, which is simply folded over then rolled up and tied with a couple of loose straps.  No M-B logo nor words.  No snaps either, just a couple of cloth straps for tying it up into a roll.

Tom in Boise
'71 280SL 4-spd, signal red w/lt. tan interior, restored/enhanced

Douglas

  • Guest
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #33 on: January 29, 2006, 04:14:03 »
Tom,

That's probably a tool roll for a W 114. The 280 SL kit had snaps. Is it dark red or green?

TR

  • Guest
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #34 on: January 29, 2006, 12:42:20 »
Douglas -- Thanks.  I'd always wondered about that.  In response to your question, it is green.

Tom in Boise
'71 280SL 4-spd, signal red w/lt. tan interior, restored/enhanced

Douglas

  • Guest
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #35 on: January 29, 2006, 13:17:42 »
That's a W 114 tool roll. The good news is it's the same tools, so all you have to do is find another case. Easily done on ebay.

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4183
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #36 on: January 29, 2006, 14:53:08 »
Just as a follow up, the tool kit for the MB 600 pullman was a no sale on Ebay at USD 312.

Jonny B
1967 250SL Auto
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4183
Re: What's the Correct Tool Roll for a '68 250SL?
« Reply #37 on: January 30, 2006, 20:41:58 »
Here is another one on e-bay and it looks to be in decent shape.
Item # 803459819

Jonny B
1967 250SL Auto
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor