Author Topic: Auto Transmission Starting in First Gear  (Read 6245 times)

rwmastel

  • Full Member
  • Platinum
  • ******
  • USA, OH, Canal Winchester
  • Posts: 4634
  • Pagoda SL Group: 20+ years and going strong!
Auto Transmission Starting in First Gear
« on: March 14, 2006, 22:55:15 »
quote:
Originally posted by cth350

The way you bypass the "start in 2nd" feature is to manually shift down ...
I'm suprised there's no simple way to bypass this.  I don't know squat about transmissions, but I figure since it starts in "1" when the lever is in "2", then that "gear shift position sensor" must be electrical or mechanical.  Can't you just modify something so the transmission always thinks the sifter position is in "2", but doesn't limit you to just the first two gears?  Thay way you always use all 4 gears in your automatic!  Anyone do this?

Rodd
Powell, Ohio, USA
1966 230SL, Euro, Auto, Leather, both  tops
1994 E420
Rodd

Did you search the forum before asking?
2017 C43 AMG
2006 Wrangler Rubicon
1966 230SL auto "Italian"

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7414
Re: Auto Transmission Starting in First Gear
« Reply #1 on: March 14, 2006, 23:13:08 »
Hello rodd,
I think Tom Sargeant has already performed this modification. He has a switch in the car when he wants to start of in first gear.

Joe Alexander
Blacklick, Ohio
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Tom

  • Full Member
  • Gold
  • *****
  • USA, VA, Alexandria
  • Posts: 624
Re: Auto Transmission Starting in First Gear
« Reply #2 on: March 15, 2006, 07:33:00 »
Joe,

Good memory.  I have a small button on the front of the console tray that activates the kickdown switch when I press the button.  The accelerator has to be slightly engaged for it to activate, but it works great.  Gernold installed this when he installed the 3.27 rear end so that if I needed a lower gear, I would not have to shift the lever.  

Best,

Tom

1971 280sl Tunis Beige Metallic (restored & enhanced)
1971 280sl Tobacco Brown (low mileage stock)
1970 280sl Deep Red (Project Car)
« Last Edit: March 15, 2006, 19:25:58 by Tom »
1971 280sl Tunis Beige Metallic

Khurram Darugar

  • Guest
Re: Auto Transmission Starting in First Gear
« Reply #3 on: March 15, 2006, 08:09:13 »
Wow thats very CooL!!

Kay
Euro 280sl LHD Auto.
« Last Edit: March 15, 2006, 09:18:40 by Khurram Darugar »

Cees Klumper

  • Full Member
  • Platinum
  • ******
  • USA, CA, Fallbrook
  • Posts: 5719
    • http://SL113.org
Re: Auto Transmission Starting in First Gear
« Reply #4 on: March 15, 2006, 15:51:50 »
For those of us with a more conventional differential (3.69 - 4.08 for example) starting out in first gear is not really that great: it will shift into second almost immediately after the car gets in motion - first is very short. But if like Tom you have a 3.27 or similar, it is probably a very welcome feature. Of course, it should start out in first even with the lever in 2, if you floor it.

Cees ("Case") Klumper in Amsterdam
'69 white 280 SL automatic
Cees Klumper
1969 Mercedes 280 SL automatic
1968 Ford Mustang 302 V8
1961 Alfa Romeo Giulietta Sprint Coupe 1600
1962 FIAT 1500S OSCA convertible
1972 Lancia Fulvia Coupe 1.3
1983 Porsche 944 2.5
1990 Ford Bronco II

TheEngineer

  • Associate Member
  • Gold
  • *****
  • USA, West Seattle, WA
  • Posts: 775
  • '69 280SL,Signal Red,
Re: Auto Transmission Starting in First Gear
« Reply #5 on: March 15, 2006, 16:00:02 »
I installed a 3.27 rear axle and find that starting in 2nd gear is quite satisfactory most of the time. But I'm an old guy and drive easy. Sometimes, on rare occasions, if I really want to have a screaming start, I floor it. Don't do that when the road is wet! And consider that it is dertrimental to your fuel economy.
'69 280SL,Signal Red, 09 cam, License BB-59U
'67 230SL, 113042-10-017463 (sld)
'50 Jaguar Roadster XK120, #670.318 (sld)
tired engineer, West-Seattle,WA